Products
Cold-shrinkable end coupling 24 kV
The main function of 24kV cold shrink cable terminal is to ensure safe and reliable cable operation, prevent damage caused by thermal expansion and contraction, and ensure good sealing and insulation protection. The cold shrink cable terminal uses cold shrink voltage control tube, suitable for voltage levels from 10kV to 35kV.
Description
marker
Product Details
The main function of 24kV cold shrink cable terminal is to ensure safe and reliable cable operation, prevent damage caused by thermal expansion and contraction, and ensure good sealing and insulation protection. The cold shrink cable terminal uses cold shrink voltage control tube, suitable for voltage levels from 10kV to 35kV. In case of 24kV application, the cold shrink cable terminal tightly grips the cable by elastic retraction force, providing good sealing and insulation protection to prevent moisture penetration and oil leakage.
1.Its working principle is to be fixed on the cable by elastic compression force, without heating, and there is no risk of the inner layer coming off when moving or bending after installation
2.In addition, the cold shrink cable terminal has the following characteristics:
Small size, easy operation and speed: no special tools are required, and the installation process is simple and fast.
Wide applicability: Suitable for cables in various environments and voltage levels.
High safety: does not require heating, suitable for environments where open flames cannot be used, such as mines, chemical industries, etc.
Therefore, 24kV cold shrink cable terminals play an important role in ensuring safe and reliable operation of cables and are suitable for various environments where efficient and safe connections are required
contact us
Related Popular Products
Fuse-(H)RW9-15kV
Mainly used for short circuit and overload protection of power lines and transformers, it also has the function of opening and closing no-load lines and low load currents.
Cold-shrinkable end coupling 1 kV
Suitable for 0.6/1kV three-phase AC distribution systems, compatible with low voltage power cables (such as YJV and VV series), with a cross-sectional area of 1.5-630mm².
Fuse (H)RWX10-35kV
Mainly used for short circuit and overload protection of power systems 35 kV and below, with high current interruption capability, suitable for protecting equipment in power lines, substations and harsh environments
Suspended insulator 110 kV
110 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. In typical applications, the rod core is made of glass fiber reinforced resin and the protective skirt is made of vulcanized high temperature silicone rubber, reducing weight by 50% compared to traditional porcelain. The technology of crimping the ends and double sealing eliminates the risk of breakdown of the connection between the core and the shell.
Heat-shrinkable middle coupling 20 kV
Heat-shrinkable cable connection is used for intermediate connection of cross-linked or oil-immersed cables with voltage levels of 35 kV and below. It is sealed and heat-shrink insulated to ensure stable electrical performance at the connection point.
Cold-shrinkable end coupling 66 kV
66KV Cold Shrink Cable Terminal (Terminal) is an insulation, sealing and mechanical protection device for 66KV power cable termination, which is the main component of the outdoor connection of high voltage cables. It adopts elastomer material pre-expansion technology and achieves high reliability of cable insulation layer sealing and termination through elastic retraction force, which has the characteristics of protection, electric field control and long-term stability.
Support insulator 220 kV
220KV Composite Column Insulators are high voltage insulation equipment made of silicone rubber as the core combined with fiberglass rods and metal accessories, specially designed for power transmission lines and substations.
Support insulator 10 kV
Post insulators are usually made of ceramic or epoxy composite materials, have a columnar structure as the main body and a corrugated surface to increase creepage distance and prevent waste water leakage and arcing.
Fuse-(H)RW10-15kV
Mainly used for short circuit and overload protection in 10kV distribution systems, with rated load current switching function, suitable for protecting overhead lines and distribution transformers
Porcelain support insulator
Porcelain support insulators are made of porcelain and are a device installed between conductors of different potentials or between conductors and grounding elements, capable of withstanding voltage and mechanical load. There are different types of insulators with different shapes. Although there are significant differences in the design and appearance of different types of insulators, they all consist of two main parts: insulating components and connecting fittings.
Suspended insulator 220 kV
220 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. The core is made of epoxy fiberglass and the protective shell is made of high temperature vulcanized silicone rubber, reducing weight by 45-50% compared to porcelain.
Support insulator 35 kV
35 kV, suitable for high-voltage overhead lines of three-phase alternating current with a frequency of 50 Hz. Composite crossbar: fiberglass rod and protective skirt made of silicone rubber, weight reduced by 60%, high impact resistance, hydrophobicity: the surface energy of silicone rubber is low, which allows maintaining high insulation in dirty conditions (the flashover voltage increases by 2 times when dirty).
Disconnector-(H)GW4-220kV
GW4-220 isolation switch is an open AC isolation switch designed specifically for 220kV high voltage power systems, mainly used for circuit switching and electrical isolation of equipment under no-load conditions.
Lightning rod 24 kV
Type classification: 24kV lightning rod is mainly composed of zinc oxide composite external type, which is suitable for lightning surge protection of distribution systems and substation equipment. Performance standards: Must comply with GB/T 18802.1 national standard and IEC60099-4 standard, and some models are suitable for special environmental requirements such as high pollution and icing
Lightning rod 330 kV
Zinc oxide lightning conductor: equipped with voltage equalization ring, excellent pollution resistance, creepage distance ≥ 25mm/kV, suitable for coastal salt fog or industrial pollution areas;
Connecting coupling EPDM 20 kV
Definition: It is a device installed in the middle of a 20 kV power cable line and used to connect two cables to ensure continuous transmission of electricity. The base material, ethylene propylene rubber, performs functions such as insulation, sealing and mechanical protection.
