Products
Lightning rod 33 kV
33kV lightning rod mainly made of zinc oxide, including power plant type, distribution type and combination type (such as integrated design of 33kV combined lightning rod and fuse), suitable for lightning surge and continuous current power frequency protection in transmission and distribution systems.
Description
marker
Product Details
Surge Limiter 33 kV Surge Limiter
33kV lightning rod mainly made of zinc oxide, including power plant type, distribution type and combination type (such as integrated design of 33kV combined lightning rod and fuse), suitable for lightning surge and continuous current power frequency protection in transmission and distribution systems.
Execution standard:It must comply with the international standard IEC60099-4, and some models must be adapted to regional grid specifications, emphasizing compatibility with system voltage and short circuit power
Main component:Zinc oxide valve plate as core, with non-linear current-voltage characteristics, response time ≤ 25ns, and current capacity meeting 33kV system short-circuit current requirements.
Shell material:Silicone rubber composite material, strong weather resistance (-40℃~+40℃), some combination models integrate fuses to achieve matched overcurrent and overvoltage protection.
Supporting structure:The fixed frame is screw fastened and the connection terminals are integrated into the fuse body during installation, which improves mechanical stability
Main functions:
Lightning protection of 33 kV power transmission and distribution lines and substation equipment, reducing the risk of lightning outages and breakdown of equipment insulation; Continuous power frequency current cutting is used to protect the safe operation of equipment such as transformers and switchgear.
contact us
Related Popular Products
Suspended insulator 110 kV
110 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. In typical applications, the rod core is made of glass fiber reinforced resin and the protective skirt is made of vulcanized high temperature silicone rubber, reducing weight by 50% compared to traditional porcelain. The technology of crimping the ends and double sealing eliminates the risk of breakdown of the connection between the core and the shell.
Heat-shrinkable end coupling 24 kV
24kV heat shrink cable terminal is a key component used to connect the terminals of 24kV voltage level power cables, mainly to achieve cable terminal sealing, insulation protection and voltage control
Support insulator 20 kV
20 kV. Made of composite material – silicone rubber. The surface of the column body has a corrugated structure to increase the leakage distance and prevent wastewater leakage. Some models use solid ceramic parts combined with a metal flange. Suitable for 50Hz three-phase AC distribution systems, substations, industrial distribution networks and other applications.
Lightning rod 11 kV
Type classification: 11kV arresters are mainly distribution type and power plant type zinc oxide lightning arresters. Zinc oxide arresters have become mainstream due to their nonlinear current-voltage characteristics and high response speed.
Fuse (H)RWX10-35kV
Mainly used for short circuit and overload protection of power systems 35 kV and below, with high current interruption capability, suitable for protecting equipment in power lines, substations and harsh environments
Support insulator 35 kV
35 kV, suitable for high-voltage overhead lines of three-phase alternating current with a frequency of 50 Hz. Composite crossbar: fiberglass rod and protective skirt made of silicone rubber, weight reduced by 60%, high impact resistance, hydrophobicity: the surface energy of silicone rubber is low, which allows maintaining high insulation in dirty conditions (the flashover voltage increases by 2 times when dirty).
GIS terminal
The gas insulated switchgear terminal (GIDU), also known as the GIRU cable terminal, is a critical element for connecting high voltage cables to GIRU equipment. Sulfur hexafluoride (SF6) is used as external insulation and the device is enclosed in a metal housing.
Plug-in connection at the rear
Appearance The overall design is T-shaped. The large port at the top is used to connect the main cable, and the perpendicular side port is used to output the branch cable. The bottom port is usually equipped with a special sealing or connecting component to ensure a reliable connection and sealing of the cable system.
Switch-GN19-12C
GN19-12C type disconnect switch is an indoor wall-mounted high-voltage distribution device widely used in 50Hz AC power systems, rated voltage 12kV. It is mainly used for switching circuits under no-load conditions to achieve reliable isolation between electrical equipment and power supply. It supports three-phase parallel installation or wall installation in special scenarios
Lightning rod 24 kV
Type classification: 24kV lightning rod is mainly composed of zinc oxide composite external type, which is suitable for lightning surge protection of distribution systems and substation equipment. Performance standards: Must comply with GB/T 18802.1 national standard and IEC60099-4 standard, and some models are suitable for special environmental requirements such as high pollution and icing
Plug-in switch-GN30-12D
GN30-12D is a special model of GN30-12: built-in grounding blade, increasing the safety of the grounding system. Supports manual control, control the movement of the blade by turning the handle.
Wind fuse-HRW12-35kV
A removable fuse is a specially designed fuse, the main feature of which is the ease of replacement and maintenance of the fuse (fuse element) without the need for a complete replacement of the equipment. Below is the basic information:
Insulator with 1/2 eye 24 kV
Connection Design: Single Eye/Double Eye Configuration: Suitable for hanging or tension insulators, double eye design is mainly used for hanging wires, and one eye for fixed ends.
Heat-shrinkable end coupling 10 kV
Heat shrink terminals, commonly known as heat shrink cable heads, are widely used in the terminals of crosslinked cables or oil immersed cables, with a voltage level of 10KV. It can be divided into "indoor style" and "outdoor style".
Cold-shrinkable end coupling 66 kV
66KV Cold Shrink Cable Terminal (Terminal) is an insulation, sealing and mechanical protection device for 66KV power cable termination, which is the main component of the outdoor connection of high voltage cables. It adopts elastomer material pre-expansion technology and achieves high reliability of cable insulation layer sealing and termination through elastic retraction force, which has the characteristics of protection, electric field control and long-term stability.
Lightning rod 6 kV
Main components: Using zinc oxide valve plates, with non-linear current-voltage characteristics and response time ≤ 25ns. Shell material: silicone rubber or ceramic material, strong weather resistance (-40℃~85℃), suitable for outdoor environments with high humidity and salt fog.
