Products
Lightning rod 11 kV
Type classification: 11kV arresters are mainly distribution type and power plant type zinc oxide lightning arresters. Zinc oxide arresters have become mainstream due to their nonlinear current-voltage characteristics and high response speed.
Description
marker
Product Details
Surge Limiter 11 kV Surge Limiter
Type classification: 11kV arresters are mainly distribution type and power plant type zinc oxide lightning arresters. Zinc oxide arresters have become mainstream due to their nonlinear current-voltage characteristics and high response speed.
Performance standard: Must comply with the national standard GB/T 18802.1, export models are compatible with IEC 60099-4 standard, emphasizing the conformity of rated voltage, residual voltage and other parameters with 11kV system
Main component: Mainly composed of zinc oxide valve plates, achieving fast response through non-linear characteristics.
Shell material: silicone rubber, weather resistance can cover -40℃~85℃, some models use epoxy resin seal to enhance moisture resistance (IP65)
Main functions:
Lightning surge protection for 11 kV distribution lines and substation equipment to reduce the frequency of lightning triggers;
Supply frequency continuous current cut-off is used to protect the insulation of equipment such as transformers and switchgear.
Adaptation environment:
Class III contaminated areas require regular cleaning of the surface from contamination;
It is recommended to use lightning protection clamps or controlled discharge lightning rods in areas with numerous thunderstorms (such as active lightning rods).
contact us
Related Popular Products
Insulator with 1/2 eye 33 kV
33 kV, suitable for three-phase power lines and 50 Hz AC distribution systems, ensures long-term outdoor operation.
Heat-shrinkable middle coupling 20 kV
Heat-shrinkable cable connection is used for intermediate connection of cross-linked or oil-immersed cables with voltage levels of 35 kV and below. It is sealed and heat-shrink insulated to ensure stable electrical performance at the connection point.
Lightning rod 10 kV
Type classification: 10kV lightning rods mainly include power plant type, distribution type, and removable type, among which zinc oxide lightning rods have become the main ones due to their non-linear current-voltage characteristics.
Support insulator 10 kV
Post insulators are usually made of ceramic or epoxy composite materials, have a columnar structure as the main body and a corrugated surface to increase creepage distance and prevent waste water leakage and arcing.
Suspended insulator 220 kV
220 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. The core is made of epoxy fiberglass and the protective shell is made of high temperature vulcanized silicone rubber, reducing weight by 45-50% compared to porcelain.
GIS terminal
The gas insulated switchgear terminal (GIDU), also known as the GIRU cable terminal, is a critical element for connecting high voltage cables to GIRU equipment. Sulfur hexafluoride (SF6) is used as external insulation and the device is enclosed in a metal housing.
Disconnector-(H)GW5-40.5kV
GW5 Isolation Switch 40.5 kV Isolation Switch (also known as disconnector) Double column horizontal rotating, consists of insulated posts, conductive blades, base and control mechanism. The blades move horizontally at a constant speed when opening and closing, with strong ice breaking ability. The insulation support is a rod structure that prevents contamination.
Middle cold-shrinkable coupling 66 kV
Rated voltage: 66 kV, lightning impulse withstand voltage ≥ 250 kV, power frequency withstand voltage ≥ 125 kV (continuously for 30 minutes); partial discharge capacity ≤ 5 pC (complies with IEC 60840 standard).
End coupling ready for installation 10 kV
Using rubber and polymer composite materials with elastic memory function, it can achieve 24 cold shrinkage installation process; The temperature resistance range covers 70℃ to 200℃, with good fire resistance and adapt to various working conditions
Fuse-(H)RW3-15kV
Type HRW3-10 is an open high voltage 10kV fuse, specially designed for short circuit and overload protection of distribution lines and transformers, with circuit isolation function
disconnector-HJDW6-0.5630~2000
HJDW6 series is a low voltage fused isolation switch designed specifically for 50Hz AC distribution lines with rated voltages of 500V and below. Mainly used for short circuit, overload, open circuit and short circuit protection under no-load conditions on the low voltage side of transformers
Heat-shrinkable end coupling 24 kV
24kV heat shrink cable terminal is a key component used to connect the terminals of 24kV voltage level power cables, mainly to achieve cable terminal sealing, insulation protection and voltage control
Lightning rod 6 kV
Main components: Using zinc oxide valve plates, with non-linear current-voltage characteristics and response time ≤ 25ns. Shell material: silicone rubber or ceramic material, strong weather resistance (-40℃~85℃), suitable for outdoor environments with high humidity and salt fog.
Heat-shrinkable end coupling 33 kV
33KV heat shrink cable terminals are mainly used for terminal sealing, insulation protection and electric field control of XLPE or oil immersed cables in medium and high voltage power systems, suitable for indoor and outdoor power plants, substations, industrial equipment and other fields. Its main functions include sealing, moisture protection, insulation protection and voltage dissipation.
Plug-in connection at the front
The European plug connector (front) is a cable splitter, which is a type of cable accessory. It is a fully insulated, sealed cable connector suitable for medium and high voltage power supply systems, typically used in ring distribution cabinets, cable drop boxes and box type substations.
Middle cold-shrinkable coupling 110 kV
Intermediate cold shrink couplings for voltage 110 kV are ready-made insulating products designed for connecting cable lines with voltage 110 kV. They provide elastic shrinkage thanks to cold shrink technology, providing reliable insulation, sealing and mechanical protection. Their main characteristics include low maintenance, ease of installation and a high degree of adaptability, allowing them to be widely used in tunnels, substations and other places.
