Products
Lightning rod 10 kV
Type classification: 10kV lightning rods mainly include power plant type, distribution type, and removable type, among which zinc oxide lightning rods have become the main ones due to their non-linear current-voltage characteristics.
Description
marker
Product Details
Surge suppressor 10kV Surge suppressor
Type classification: 10kV lightning rods mainly include power plant type, distribution type, and removable type, among which zinc oxide lightning rods have become the main ones due to their non-linear current-voltage characteristics.
Performance standards: National standards such as GB/T 18802.1 must be followed, and some models must be adapted to the technical specifications of the Guangdong power grid, emphasizing the conformity of the basic parameters such as rated voltage and residual voltage with the requirements of the power system
Core components: Zinc oxide valve plate is the main body, and some patented designs are combined with discharge chamber components to reduce normal power consumption through open circuit condition and achieve protection by fast conduction under high voltage.
Shell material: silicone rubber or epoxy resin composite material, strong weather resistance (-40℃~+40℃), detachable model equipped with a disconnect switch, automatically folding down to isolate the fault in case of failure.
Sealing process: Silicone rubber seals combined to reduce contact resistance and the risk of oxidation
Features:
Lightning surge protection for 10 kV distribution lines and transformers to reduce lightning outages;
Protection of overhead power lines in coastal and windy areas, suitable for environments with ice cover ≤ 10mm.
Adaptation scenarios:
Lines without lightning protection wires should be equipped with lightning protection wire clamps or even lightning rods to create multiple protection;
Chemical industrial parks and other areas with high levels of pollution require regular cleaning to remove accumulated surface dirt.
contact us
Related Popular Products
Disconnector-(H)GW4-24kV
GW4 Isolation Switch 24kV Isolation Switch (also known as a disconnector) The GW4 series breakers include 24kV voltage level models suitable for the electrical insulation requirements of medium voltage distribution systems
Plug-in assembly
The European connector head (a combination of front and rear plugs) is a cable splitter, which is a type of cable accessory.
“H” type connector
An H-shaped cable connector is a cable accessory used to connect cables to ensure continuity of cable lines. It provides protection and support for electrical connections as well as mechanical support for cables.
Plug-in connection at the rear
Appearance The overall design is T-shaped. The large port at the top is used to connect the main cable, and the perpendicular side port is used to output the branch cable. The bottom port is usually equipped with a special sealing or connecting component to ensure a reliable connection and sealing of the cable system.
Suspended insulator 220 kV
220 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. The core is made of epoxy fiberglass and the protective shell is made of high temperature vulcanized silicone rubber, reducing weight by 45-50% compared to porcelain.
Lightning rod 110 kV
Type classification: Power plant type: suitable for incoming line end substation and high voltage protection transformer side; Line type: hanging or pedestal design, partially integrated with the disconnector function, can quickly cut off the power frequency continuous current and reduce the lightning frequency.
Heat-shrinkable middle coupling 20 kV
Heat-shrinkable cable connection is used for intermediate connection of cross-linked or oil-immersed cables with voltage levels of 35 kV and below. It is sealed and heat-shrink insulated to ensure stable electrical performance at the connection point.
“T” type connector
The T-plug connector is a fully insulated and sealed cable connector widely used in medium and high voltage power supply systems. Thanks to its T-shaped design, it allows for quick connection and disconnection of cables to equipment. Its main features include electrical stability and environmental adaptability. It is widely used in ring network distribution cabinets, branch cables and other systems.
Pin insulator 10 kV
The product includes a fiberglass and epoxy resin rod, a silicone rubber protective skirt, and metal connectors (such as fittings). Process Features: The silicone rubber protective skirt is made by injection molding to improve the electrical insulation of the interface; the metal reinforcement is connected to the core by crimping to provide flexural strength.
Fuse-(H)RW12-35kV
Specially designed for short circuit and overload protection of distribution lines and transformers, with the function of splitting and combining load currents, suitable for protecting power equipment on overhead lines and in harsh environments
Lightning rod 6 kV
Main components: Using zinc oxide valve plates, with non-linear current-voltage characteristics and response time ≤ 25ns. Shell material: silicone rubber or ceramic material, strong weather resistance (-40℃~85℃), suitable for outdoor environments with high humidity and salt fog.
Plug-in switch-GN30-12
The disconnector type GN30-12 is a rotating contact blade for indoor high-voltage switchgear, suitable for power systems with 50 Hz alternating current and 12 kV rated voltage. It is mainly used to open and close circuits under no-load conditions to achieve electrical isolation. Its compact design is suitable for installation in high-voltage switchgears, improving distribution system space utilization
disconnector-HJDW6-0.5630~2000
HJDW6 series is a low voltage fused isolation switch designed specifically for 50Hz AC distribution lines with rated voltages of 500V and below. Mainly used for short circuit, overload, open circuit and short circuit protection under no-load conditions on the low voltage side of transformers
Heat-shrinkable end coupling 24 kV
24kV heat shrink cable terminal is a key component used to connect the terminals of 24kV voltage level power cables, mainly to achieve cable terminal sealing, insulation protection and voltage control
Fuse (H)RWX10-35kV
Mainly used for short circuit and overload protection of power systems 35 kV and below, with high current interruption capability, suitable for protecting equipment in power lines, substations and harsh environments
Insulator with 1/2 eye 24 kV
Connection Design: Single Eye/Double Eye Configuration: Suitable for hanging or tension insulators, double eye design is mainly used for hanging wires, and one eye for fixed ends.
