Products
Fuse (H)RW12-24kV
Specially designed for short circuit and overload protection of distribution lines and transformers, with the function of splitting and combining load currents, suitable for protecting power equipment on overhead lines and in harsh environments
Description
marker
Product Details
HRW12 12/24 kV outdoor switch-fuse
Specially designed for short circuit and overload protection of distribution lines and transformers, with the function of splitting and combining load currents, suitable for protecting power equipment on overhead lines and in harsh environments
Basic functions
Short Circuit Protection: The fuse melts quickly, isolating short circuit currents and protecting distribution transformers and transmission lines.
Overload protection: achieving delayed melting due to the thermal accumulation effect of fuses, corresponding to the overload characteristics of the equipment.
Load current switching: Supports manual switching of rated load current (≤ 200A), with isolating switch function.
Benefits
High Reliability: Elastic auxiliary contact paired with arc-extinguishing cover enhances the stability and safety of opening and closing.
Long service life: Mechanical service life ≥ 2000 opening and closing operations, suitable for frequent operating scenarios.
Typical Application Scenarios
Distribution transformer protection: Short circuit and overload protection on the high voltage side of 12/24 kV transformers.
Branches of overhead power lines: short circuit insulation and load switching on branches of distribution networks.
Protection against adverse conditions: protecting power lines in high mountain, windy and coastal areas
The HRW12 fuse, with its optimized arcing characteristics, high mechanical life and environmental adaptability, has become the main device for short-circuit protection and load switching in 12/24 kV distribution networks, suitable for power grid scenarios with high stability and safety requirements.
contact us
Related Popular Products
Switch-(H)GW4-15
GW4 series disconnect switches are outdoor high-voltage switchgears widely used in power systems, mainly for voltage isolation and safety protection in electrical equipment maintenance.
Lightning rod 11 kV
Type classification: 11kV arresters are mainly distribution type and power plant type zinc oxide lightning arresters. Zinc oxide arresters have become mainstream due to their nonlinear current-voltage characteristics and high response speed.
Fuse-(H)RW5-35 kV
HRW5 series is a 35kV open high voltage fuse specially designed for short circuit and overload protection of power lines and transformers, with open circuit and low load current line opening and closing functions.
Terminal made of ceramic-silicon-rubber composite material
The composite termination (terminal) is usually installed outdoors and serves as a termination device for high-voltage cables. Its main function is to connect underground or ducted high-voltage power cables to overhead power lines or key substation equipment such as transformers and switching devices.
Cold-shrinkable end coupling 33 kV
Insulation protection: Cold shrink cable terminal uses cold shrink voltage control tube, which can effectively insulate the cable from the external environment, prevent the cable from being damaged by external factors, and ensure good insulation protection
Middle cold-shrinkable coupling 110 kV
Intermediate cold shrink couplings for voltage 110 kV are ready-made insulating products designed for connecting cable lines with voltage 110 kV. They provide elastic shrinkage thanks to cold shrink technology, providing reliable insulation, sealing and mechanical protection. Their main characteristics include low maintenance, ease of installation and a high degree of adaptability, allowing them to be widely used in tunnels, substations and other places.
Fuse-(H)RW3-15kV
Type HRW3-10 is an open high voltage 10kV fuse, specially designed for short circuit and overload protection of distribution lines and transformers, with circuit isolation function
Plug-in assembly
The European connector head (a combination of front and rear plugs) is a cable splitter, which is a type of cable accessory.
Middle cold-shrinkable coupling 24 kV
Conductor Connection: Uses crimping or welding technology to securely connect two cable cores, which ensures good electrical conductivity between conductors, reduces contact resistance and minimizes energy loss. The insulating layer is made of silicone rubber, which has excellent insulating properties and corona resistance. It can withstand 24 kV voltage, preventing current leakage and short circuit.
Support insulator 66 kV
66 kV, suitable for three-phase high voltage AC transmission systems with a frequency of 50 Hz. The design consists of a fiberglass rod and a silicone rubber protective umbrella, which is 50% lighter than porcelain and resistant to UV radiation and salt spray.
Plug-in switch-GN30-12D
GN30-12D is a special model of GN30-12: built-in grounding blade, increasing the safety of the grounding system. Supports manual control, control the movement of the blade by turning the handle.
Disconnectors 24 kV Russia
Components: Consists of base, rotating shaft, frame, insulated contact blade, contacts and connecting structure, and other components using three-phase parallel.
Lightning rod 35 kV
Composite silicone rubber type (excellent dirt and explosion resistance); The main models include power plant type, line suspension type and gapless zinc oxide lightning rod. Performance standard: Meets the national standard GB/T 18802.1, and some models are suitable for special environmental requirements such as high altitude and salt fog
Switch-(H)GW1-15
Isolation switch GW1 is a switching device mainly used for 15kV transmission lines, designed for “power supply isolation, switching, connection and disconnection of small current circuits”, without arc suppression function.
Suspended insulator 110 kV
110 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. In typical applications, the rod core is made of glass fiber reinforced resin and the protective skirt is made of vulcanized high temperature silicone rubber, reducing weight by 50% compared to traditional porcelain. The technology of crimping the ends and double sealing eliminates the risk of breakdown of the connection between the core and the shell.
End coupling ready for installation 24 kV
Rated voltage: 12/24 kV, 18/24 kV two voltage levels, suitable for cross-linked polyethylene (XLPE) cable systems, local discharge capacity: ≤ 10pC
