Products
Middle cold-shrinkable coupling 24 kV
Conductor Connection: Uses crimping or welding technology to securely connect two cable cores, which ensures good electrical conductivity between conductors, reduces contact resistance and minimizes energy loss.
The insulating layer is made of silicone rubber, which has excellent insulating properties and corona resistance. It can withstand 24 kV voltage, preventing current leakage and short circuit.
Description
marker
Product Details
It is an insulating and sealing component used for intermediate connection of 24 kV power cables.
Structural composition
Conductor Connection: Uses crimping or welding technology to securely connect two cable cores, which ensures good electrical conductivity between conductors, reduces contact resistance and minimizes energy loss.
The insulating layer is made of silicone rubber, which has excellent insulating properties and corona resistance. It can withstand 24 kV voltage, preventing current leakage and short circuit.
Voltage control design: using special shapes and materials to improve the distribution of the electric field at the cut point of the shielding layer of the cable insulation, reducing the electric field strength, preventing partial discharges and ensuring stable electrical performance of the connection.
Inner and outer semiconducting layers: the inner semiconducting layer fits tightly to the insulating layer, creating a uniform electric field; The outer semiconducting layer is connected to the outer semiconducting shielding layer of the cable to prevent electric field concentration and provide shielding. Sealing structure: Composed of rubber O-rings, sealant, etc., prevent moisture, dampness and other contaminants from entering the inside of the joint, ensuring long-term stable performance.
contact us
Related Popular Products
Terminal made of ceramic-silicon-rubber composite material
The composite termination (terminal) is usually installed outdoors and serves as a termination device for high-voltage cables. Its main function is to connect underground or ducted high-voltage power cables to overhead power lines or key substation equipment such as transformers and switching devices.
Fuse-(H)RW3-15kV
Type HRW3-10 is an open high voltage 10kV fuse, specially designed for short circuit and overload protection of distribution lines and transformers, with circuit isolation function
Lightning rod 330 kV
Zinc oxide lightning conductor: equipped with voltage equalization ring, excellent pollution resistance, creepage distance ≥ 25mm/kV, suitable for coastal salt fog or industrial pollution areas;
Lightning rod 220 kV
Power plant type: suitable for protecting the incoming line of 220kV substation and the high voltage side of the transformer; Line Type: Suspended structure, built-in disconnector function, used to protect power lines from lightning surge, reducing lightning trigger speed
Lightning rod 11 kV
Type classification: 11kV arresters are mainly distribution type and power plant type zinc oxide lightning arresters. Zinc oxide arresters have become mainstream due to their nonlinear current-voltage characteristics and high response speed.
Fuse-(H)RW7-15kV
Main Functions Short Circuit Protection: The fuse melts quickly, cutting off short circuit current, protecting transformers and transmission lines. Overload protection: achieving delayed melting due to the thermal accumulation effect of fuses, which meets the requirements of equipment overload. Load current switching: Supports manual switching of rated load current (≤100A), easy to operate.
Lightning rod 33 kV
33kV lightning rod mainly made of zinc oxide, including power plant type, distribution type and combination type (such as integrated design of 33kV combined lightning rod and fuse), suitable for lightning surge and continuous current power frequency protection in transmission and distribution systems.
Cold-shrinkable end coupling 1 kV
Suitable for 0.6/1kV three-phase AC distribution systems, compatible with low voltage power cables (such as YJV and VV series), with a cross-sectional area of 1.5-630mm².
Insulator with 1/2 eye 24 kV
Connection Design: Single Eye/Double Eye Configuration: Suitable for hanging or tension insulators, double eye design is mainly used for hanging wires, and one eye for fixed ends.
Switch-(H)GW4-15
GW4 series disconnect switches are outdoor high-voltage switchgears widely used in power systems, mainly for voltage isolation and safety protection in electrical equipment maintenance.
Disconnector-(H)GW4-24kV
GW4 Isolation Switch 24kV Isolation Switch (also known as a disconnector) The GW4 series breakers include 24kV voltage level models suitable for the electrical insulation requirements of medium voltage distribution systems
Cold-shrinkable end coupling 24 kV
The main function of 24kV cold shrink cable terminal is to ensure safe and reliable cable operation, prevent damage caused by thermal expansion and contraction, and ensure good sealing and insulation protection. The cold shrink cable terminal uses cold shrink voltage control tube, suitable for voltage levels from 10kV to 35kV.
Connecting coupling EPDM 20 kV
Definition: It is a device installed in the middle of a 20 kV power cable line and used to connect two cables to ensure continuous transmission of electricity. The base material, ethylene propylene rubber, performs functions such as insulation, sealing and mechanical protection.
Cold-shrinkable end coupling 66 kV
66KV Cold Shrink Cable Terminal (Terminal) is an insulation, sealing and mechanical protection device for 66KV power cable termination, which is the main component of the outdoor connection of high voltage cables. It adopts elastomer material pre-expansion technology and achieves high reliability of cable insulation layer sealing and termination through elastic retraction force, which has the characteristics of protection, electric field control and long-term stability.
Fuse-HPRWG2-15 kV
Specially designed for 35kV power systems, it has short circuit, overload and load current switching protection functions, suitable for harsh environments such as wind farms and power lines
Suspended insulator 220 kV
220 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. The core is made of epoxy fiberglass and the protective shell is made of high temperature vulcanized silicone rubber, reducing weight by 45-50% compared to porcelain.
