Products
Disconnector-(H)GW4-220kV
GW4-220 isolation switch is an open AC isolation switch designed specifically for 220kV high voltage power systems, mainly used for circuit switching and electrical isolation of equipment under no-load conditions.
Description
marker
Product Details
GW4-220 isolation switch is an open AC isolation switch designed specifically for 220KV high voltage power systems, mainly used for circuit switching and electrical isolation of equipment under no-load conditions.
Mechanical structure
Adopting single-column double-lever structure, with split design for moving and fixed contacts, resulting in low contact resistance;
Coating treatment of conductive components to improve corrosion resistance; The grounding circuit uses aluminum alloy conductive rods and soft connections, with high reliability;
Waterproof bearing seat design, open standard stainless steel material to reduce the risk of corrosion
Application scenarios
- Isolation and maintenance equipment for substations/power plants to ensure the safety of operating personnel
- The power distribution system cooperates with circuit breakers to achieve control of the power outage process (opening the circuit breaker before power outage, and closing the isolation switch before transmitting power)
Switching high-voltage lines during idle conditions to optimize power system performance
The GW4 Series 220kV disconnector combines the safety, durability and ease of maintenance of high voltage systems through design optimization and material upgrades.
contact us
Related Popular Products
End coupling ready for installation 24 kV
Rated voltage: 12/24 kV, 18/24 kV two voltage levels, suitable for cross-linked polyethylene (XLPE) cable systems, local discharge capacity: ≤ 10pC
Wind fuse-HRW12-35kV
A removable fuse is a specially designed fuse, the main feature of which is the ease of replacement and maintenance of the fuse (fuse element) without the need for a complete replacement of the equipment. Below is the basic information:
Lightning rod 24 kV
Type classification: 24kV lightning rod is mainly composed of zinc oxide composite external type, which is suitable for lightning surge protection of distribution systems and substation equipment. Performance standards: Must comply with GB/T 18802.1 national standard and IEC60099-4 standard, and some models are suitable for special environmental requirements such as high pollution and icing
Lightning rod 330 kV
Zinc oxide lightning conductor: equipped with voltage equalization ring, excellent pollution resistance, creepage distance ≥ 25mm/kV, suitable for coastal salt fog or industrial pollution areas;
disconnector-HRWK-0.5400~800
HRWK series is a low voltage fused isolation switch designed for 50Hz AC distribution systems with rated voltage of 0.5kV and below, with circuit isolation and short circuit protection functions.
“H” type connector
An H-shaped cable connector is a cable accessory used to connect cables to ensure continuity of cable lines. It provides protection and support for electrical connections as well as mechanical support for cables.
Cold-shrinkable end coupling 24 kV
The main function of 24kV cold shrink cable terminal is to ensure safe and reliable cable operation, prevent damage caused by thermal expansion and contraction, and ensure good sealing and insulation protection. The cold shrink cable terminal uses cold shrink voltage control tube, suitable for voltage levels from 10kV to 35kV.
Fuse-(H)RW3-15kV
Type HRW3-10 is an open high voltage 10kV fuse, specially designed for short circuit and overload protection of distribution lines and transformers, with circuit isolation function
Disconnector-(H)GW4-27.5kV
GW4 Isolation Switch 27.5kV Isolation Switch (also known as Disconnector) The GW4 series 27.5kV Isolation Switch is designed specifically for railway catenary systems and specific high voltage scenarios
End coupling ready for installation 10 kV
Using rubber and polymer composite materials with elastic memory function, it can achieve 24 cold shrinkage installation process; The temperature resistance range covers 70℃ to 200℃, with good fire resistance and adapt to various working conditions
Switch-GN19-12C
GN19-12C type disconnect switch is an indoor wall-mounted high-voltage distribution device widely used in 50Hz AC power systems, rated voltage 12kV. It is mainly used for switching circuits under no-load conditions to achieve reliable isolation between electrical equipment and power supply. It supports three-phase parallel installation or wall installation in special scenarios
Lightning rod 33 kV
33kV lightning rod mainly made of zinc oxide, including power plant type, distribution type and combination type (such as integrated design of 33kV combined lightning rod and fuse), suitable for lightning surge and continuous current power frequency protection in transmission and distribution systems.
Lightning rod 10 kV
Type classification: 10kV lightning rods mainly include power plant type, distribution type, and removable type, among which zinc oxide lightning rods have become the main ones due to their non-linear current-voltage characteristics.
Disconnector-(H)GW4-126kV(138kV)
GW4 Isolation Switch 126-138 kV Isolation Switch (also known as a disconnector) Used for line isolation, equipment maintenance, or power system switching during no-load conditions, cannot disconnect loads or fault currents and must be used in conjunction with circuit breakers.
Fuse-(H)RW7-15kV
Main Functions Short Circuit Protection: The fuse melts quickly, cutting off short circuit current, protecting transformers and transmission lines. Overload protection: achieving delayed melting due to the thermal accumulation effect of fuses, which meets the requirements of equipment overload. Load current switching: Supports manual switching of rated load current (≤100A), easy to operate.
GIS terminal
The gas insulated switchgear terminal (GIDU), also known as the GIRU cable terminal, is a critical element for connecting high voltage cables to GIRU equipment. Sulfur hexafluoride (SF6) is used as external insulation and the device is enclosed in a metal housing.
