Products
Disconnector-(H)GW4-126kV(138kV)
GW4 Isolation Switch 126-138kV Isolation Switch (also known as Disconnector)
Used for line isolation, equipment maintenance, or power system switching during no-load conditions, cannot interrupt loads or fault currents and must be used in conjunction with circuit breakers.
Description
marker
Product Details
GW4 Isolation Switch 126-138kV Isolation Switch (also known as Disconnector)
Used for line isolation, equipment maintenance, or power system switching during no-load conditions, cannot interrupt loads or fault currents and must be used in conjunction with circuit breakers.
Can be configured with single- or double-ended ground switches (eg GW4-126D/DW type) to achieve isolation between the main circuit and ground.
Typical Application Scenarios
- High-voltage power lines: 126 kV substation bus segmentation, transformer neutral point isolation and line open-circuit switching.
- Isolation when servicing equipment: When servicing and switching off power to the circuit breaker are combined, visible electrical break points are created.
- Industrial power systems: insulation and protection of high-voltage distribution systems in large industrial and mining plants.
The 126kV GW4 isolation switch, with its modular design, high reliability and ability to adapt to difficult environments, has become the core equipment for the safe operation and maintenance of high-voltage power grids. When choosing, you should focus on the current power, grounding configuration and compliance with the pollution level.
contact us
Related Popular Products
Disconnector-(H)GW4-40.5kV
Ratings Voltage level: 40.5KV, suitable for three-phase AC 50Hz 24 Current specifications: Cover configurations such as 630A, 1250A, 2000A, etc., to meet different load requirements. Insulation characteristics: Frequency withstand voltage 95 kV (to ground), lightning impulse withstand voltage 185 kV (to ground), in accordance with IEC standards.
Lightning rod 330 kV
Zinc oxide lightning conductor: equipped with voltage equalization ring, excellent pollution resistance, creepage distance ≥ 25mm/kV, suitable for coastal salt fog or industrial pollution areas;
Disconnector-(H)GW4-72.5kV
GW4 Isolation Switch 72.5kV Isolation switch (also known as disconnector) 72.5kV, suitable for high voltage 50/60Hz three-phase AC transmission system. Insulation characteristics: lightning impulse withstand voltage 185 kV (to ground), power frequency withstand voltage 100 kV (to ground), higher value of failure withstand voltage, ensuring the reliability of electrical insulation after tripping.
Fuse (H)RWX10-35kV
Mainly used for short circuit and overload protection of power systems 35 kV and below, with high current interruption capability, suitable for protecting equipment in power lines, substations and harsh environments
Fuse-(H)RW9-15kV
Mainly used for short circuit and overload protection of power lines and transformers, it also has the function of opening and closing no-load lines and low load currents.
Switch-GN19-12C
GN19-12C type disconnect switch is an indoor wall-mounted high-voltage distribution device widely used in 50Hz AC power systems, rated voltage 12kV. It is mainly used for switching circuits under no-load conditions to achieve reliable isolation between electrical equipment and power supply. It supports three-phase parallel installation or wall installation in special scenarios
“+” type connector
A cross-shaped removable contact tip is a device designed to quickly connect and disconnect pipelines without the use of complex tools. Connection and disconnection of the piping system is accomplished by simple insertion and removal.
Heat-shrinkable middle coupling 20 kV
Heat-shrinkable cable connection is used for intermediate connection of cross-linked or oil-immersed cables with voltage levels of 35 kV and below. It is sealed and heat-shrink insulated to ensure stable electrical performance at the connection point.
Disconnector-(H)GW4-24kV
GW4 Isolation Switch 24kV Isolation Switch (also known as a disconnector) The GW4 series breakers include 24kV voltage level models suitable for the electrical insulation requirements of medium voltage distribution systems
Middle cold-shrinkable coupling 33 kV
Suitable for 33kV AC three-phase systems, designed using double-layer cold-shrink silicone tube with built-in stress cone to distribute the electric field evenly, local discharge capacity ≤ 10 pC; The connection of conductors is carried out by crimping, and the copper tube is suitable for cable cross-sections from 50 to 1000 mm².
End coupling ready for installation 6 kV
Using rubber and polymer composite materials with elastic memory function, it can achieve cold shrinkage installation process of 24; Temperature resistance range covers 70℃ to 200℃, with good fire resistance and adapt to various working conditions
Lightning rod 220 kV
Power plant type: suitable for protecting the incoming line of 220kV substation and the high voltage side of the transformer; Line Type: Suspended structure, built-in disconnector function, used to protect power lines from lightning surge, reducing lightning trigger speed
Lightning rod 6 kV
Main components: Using zinc oxide valve plates, with non-linear current-voltage characteristics and response time ≤ 25ns. Shell material: silicone rubber or ceramic material, strong weather resistance (-40℃~85℃), suitable for outdoor environments with high humidity and salt fog.
Cold-shrinkable end coupling 10 kV
Made of silicone rubber or EPDM elastomer material through injection vulcanization molding and diameter expansion process, it has high elasticity and hydrophobicity. Once installed, it fits tightly to the cable interface, forming a sealed structure.
Cold-shrinkable end coupling 6 kV
6KV Cold Shrink Cable Terminal is a cable accessory that is made of elastic materials (such as silicone rubber or EPDM), sealed and insulated by elastic compression force. Its main components include cold shrink tension control tube, insulating tube, branch coupling, etc. Adaptive shrinkage is achieved by removing the inner support spiral tape to match the cable interface
Lightning rod 11 kV
Type classification: 11kV arresters are mainly distribution type and power plant type zinc oxide lightning arresters. Zinc oxide arresters have become mainstream due to their nonlinear current-voltage characteristics and high response speed.
