Products
Plug-in connection at the front
The European plug connector (front) is a cable splitter, which is a type of cable accessory.
It is a fully insulated, sealed cable connector suitable for medium and high voltage power supply systems, typically used in ring distribution cabinets, cable drop boxes and box type substations.
Description
marker
Product Details
The European plug connector (front) is a cable splitter, which is a type of cable accessory.
It is a fully insulated, sealed cable connector suitable for medium and high voltage power supply systems, typically used in ring distribution cabinets, cable drop boxes and box type substations.
Classification: The connectors are divided into regular type, waterproof type, dustproof type, mini type, etc. depending on the operating conditions;
Based on the installation method, the connectors are divided into front-connected connectors (connected directly to the equipment) and rear-connected connectors (suitable for cable drop boxes).
Basic parameters
Voltage level: 10 kV, 12 kV - 24 kV, voltage 35 V.
Rated current: Standard - 630 A, some models can withstand short-term overload up to 900 A (for 8 hours).
Applicable cables: Conductor cross-section 25–400 mm² (copper or aluminum), compatible with insulation materials such as cross-linked polyethylene (XLPE).
Applications
Power equipment connection: used for input and output terminals of transformers, ring network cabinets and cable branches, allows vertical, horizontal and angular installation.
Industrial field: Protection degree up to IP44/IP66/IP67, suitable for industrial control equipment and outdoor devices.
contact us
Related Popular Products
Plug-in connection at the rear
Appearance The overall design is T-shaped. The large port at the top is used to connect the main cable, and the perpendicular side port is used to output the branch cable. The bottom port is usually equipped with a special sealing or connecting component to ensure a reliable connection and sealing of the cable system.
Fuse (H)RW12-24kV
Specially designed for short circuit and overload protection of distribution lines and transformers, with the function of splitting and combining load currents, suitable for protecting power equipment on overhead lines and in harsh environments
Cold-shrinkable end coupling 6 kV
6KV Cold Shrink Cable Terminal is a cable accessory that is made of elastic materials (such as silicone rubber or EPDM), sealed and insulated by elastic compression force. Its main components include cold shrink tension control tube, insulating tube, branch coupling, etc. Adaptive shrinkage is achieved by removing the inner support spiral tape to match the cable interface
Heat shrink cable connector 230 kV
The 230 kV cable intermediate connector, whose voltage typically corresponds to the 127/220 kV rated voltage, is a critical component in high-voltage power transmission lines. It is mainly divided into two functional types and widely used in prefabricated structure.
“H” type connector
An H-shaped cable connector is a cable accessory used to connect cables to ensure continuity of cable lines. It provides protection and support for electrical connections as well as mechanical support for cables.
Plug-in switch-GN30-12
The disconnector type GN30-12 is a rotating contact blade for indoor high-voltage switchgear, suitable for power systems with 50 Hz alternating current and 12 kV rated voltage. It is mainly used to open and close circuits under no-load conditions to achieve electrical isolation. Its compact design is suitable for installation in high-voltage switchgears, improving distribution system space utilization
Lightning rod 11 kV
Type classification: 11kV arresters are mainly distribution type and power plant type zinc oxide lightning arresters. Zinc oxide arresters have become mainstream due to their nonlinear current-voltage characteristics and high response speed.
Plug-in switch-GN19-12
The GN19-12 type disconnect switch is an indoor high-voltage switching device widely used in power systems with 50 Hz alternating current and 12 kV rated voltage. Mainly used to open and close circuits under no-load conditions to achieve reliable insulation between electrical equipment and power supply. It is divided into regular type (GN19-12) and wall type (GN19-12C), and supports three-phase parallel installation or wall installation in special scenarios.
Disconnector-(H)GW5-40.5kV
GW5 Isolation Switch 40.5 kV Isolation Switch (also known as disconnector) Double column horizontal rotating, consists of insulated posts, conductive blades, base and control mechanism. The blades move horizontally at a constant speed when opening and closing, with strong ice breaking ability. The insulation support is a rod structure that prevents contamination.
Disconnector-(H)GW4-72.5kV
GW4 Isolation Switch 72.5kV Isolation switch (also known as disconnector) 72.5kV, suitable for high voltage 50/60Hz three-phase AC transmission system. Insulation characteristics: lightning impulse withstand voltage 185 kV (to ground), power frequency withstand voltage 100 kV (to ground), higher value of failure withstand voltage, ensuring the reliability of electrical insulation after tripping.
Plug-in switch-GN30-12D
GN30-12D is a special model of GN30-12: built-in grounding blade, increasing the safety of the grounding system. Supports manual control, control the movement of the blade by turning the handle.
Disconnector-(H)GW4-27.5kV
GW4 Isolation Switch 27.5kV Isolation Switch (also known as Disconnector) The GW4 series 27.5kV Isolation Switch is designed specifically for railway catenary systems and specific high voltage scenarios
Insulator with 1/2 eye 33 kV
33 kV, suitable for three-phase power lines and 50 Hz AC distribution systems, ensures long-term outdoor operation.
Fuse-(H)RW5-35 kV
HRW5 series is a 35kV open high voltage fuse specially designed for short circuit and overload protection of power lines and transformers, with open circuit and low load current line opening and closing functions.
Suspended insulator 110 kV
110 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. In typical applications, the rod core is made of glass fiber reinforced resin and the protective skirt is made of vulcanized high temperature silicone rubber, reducing weight by 50% compared to traditional porcelain. The technology of crimping the ends and double sealing eliminates the risk of breakdown of the connection between the core and the shell.
Plug-in assembly
The European connector head (a combination of front and rear plugs) is a cable splitter, which is a type of cable accessory.
