Products
Disconnector-(H)GW4-24kV
GW4 Isolation switch 24kV Isolation switch (also known as disconnector)
The GW4 series circuit breakers include 24 kV models suitable for electrical insulation requirements in medium voltage distribution systems
Description
marker
Product Details
GW4 Isolation switch 24kV Isolation switch (also known as disconnector)
The GW4 series circuit breakers include 24 kV models suitable for electrical insulation requirements in medium voltage distribution systems
Application Scenarios: Primarily used for electrical isolation under open-circuit current conditions in industrial and mining substations and distribution systems, maintaining safe operation during line or equipment maintenance.
Adaptation to the environment
Operating temperature range: -35℃ to +40℃ (can be extended to -40℃ in high mountain regions).
Wind resistance: ≤ 34 m/s², ice thickness ≤ 10 mm, suitable for moderately polluted areas (level III).
Typical Application Scenarios
- Distribution system isolation: small substation on the incoming line side, distribution line segmentation point.
- Equipment Maintenance Guarantee: When combined with a circuit breaker, turn off the power to create a visible break point.
- Adaptation to industrial facilities: Suitable for distribution networks in industrial plants such as metallurgy and chemical engineering, where frequent operations and difficult conditions are required.
The 24kV Isolation Switch GW4 combines functionality and cost-effectiveness in medium voltage scenarios thanks to its modular design and highly reliable components, making it the equipment of choice for safe isolation in distribution systems
contact us
Related Popular Products
Heat-shrinkable end coupling 24 kV
24kV heat shrink cable terminal is a key component used to connect the terminals of 24kV voltage level power cables, mainly to achieve cable terminal sealing, insulation protection and voltage control
Lightning rod 33 kV
33kV lightning rod mainly made of zinc oxide, including power plant type, distribution type and combination type (such as integrated design of 33kV combined lightning rod and fuse), suitable for lightning surge and continuous current power frequency protection in transmission and distribution systems.
Suspended insulator 10 kV
10kV suspension insulator is a key component used to support wires and provide insulation in power systems, mainly applied in key assemblies such as tension rods and corner rods of overhead power lines.
Middle cold-shrinkable coupling 66 kV
Rated voltage: 66 kV, lightning impulse withstand voltage ≥ 250 kV, power frequency withstand voltage ≥ 125 kV (continuously for 30 minutes); partial discharge capacity ≤ 5 pC (complies with IEC 60840 standard).
Plug-in switch-GN19-12
The GN19-12 type disconnect switch is an indoor high-voltage switching device widely used in power systems with 50 Hz alternating current and 12 kV rated voltage. Mainly used to open and close circuits under no-load conditions to achieve reliable insulation between electrical equipment and power supply. It is divided into regular type (GN19-12) and wall type (GN19-12C), and supports three-phase parallel installation or wall installation in special scenarios.
Disconnector-(H)GW5-40.5kV
GW5 Isolation Switch 40.5 kV Isolation Switch (also known as disconnector) Double column horizontal rotating, consists of insulated posts, conductive blades, base and control mechanism. The blades move horizontally at a constant speed when opening and closing, with strong ice breaking ability. The insulation support is a rod structure that prevents contamination.
Disconnectors 24 kV Russia
Components: Consists of base, rotating shaft, frame, insulated contact blade, contacts and connecting structure, and other components using three-phase parallel.
Fuse (H)RW12-24kV
Specially designed for short circuit and overload protection of distribution lines and transformers, with the function of splitting and combining load currents, suitable for protecting power equipment on overhead lines and in harsh environments
“T” type connector
The T-plug connector is a fully insulated and sealed cable connector widely used in medium and high voltage power supply systems. Thanks to its T-shaped design, it allows for quick connection and disconnection of cables to equipment. Its main features include electrical stability and environmental adaptability. It is widely used in ring network distribution cabinets, branch cables and other systems.
Insulator with 1/2 eye 33 kV
33 kV, suitable for three-phase power lines and 50 Hz AC distribution systems, ensures long-term outdoor operation.
GIS terminal
The gas insulated switchgear terminal (GIDU), also known as the GIRU cable terminal, is a critical element for connecting high voltage cables to GIRU equipment. Sulfur hexafluoride (SF6) is used as external insulation and the device is enclosed in a metal housing.
Fuse-HPRWG2-15 kV
Specially designed for 35kV power systems, it has short circuit, overload and load current switching protection functions, suitable for harsh environments such as wind farms and power lines
Lightning rod 66 kV
Zinc Oxide Composite Type: Highly resistant to contamination, suitable for substations and power lines Performance Standard: Meets GB/T 18802.1 and IEC 60099-4 specifications
Connecting coupling EPDM 20 kV
Definition: It is a device installed in the middle of a 20 kV power cable line and used to connect two cables to ensure continuous transmission of electricity. The base material, ethylene propylene rubber, performs functions such as insulation, sealing and mechanical protection.
Lightning rod 11 kV
Type classification: 11kV arresters are mainly distribution type and power plant type zinc oxide lightning arresters. Zinc oxide arresters have become mainstream due to their nonlinear current-voltage characteristics and high response speed.
Support insulator 35 kV
35 kV, suitable for high-voltage overhead lines of three-phase alternating current with a frequency of 50 Hz. Composite crossbar: fiberglass rod and protective skirt made of silicone rubber, weight reduced by 60%, high impact resistance, hydrophobicity: the surface energy of silicone rubber is low, which allows maintaining high insulation in dirty conditions (the flashover voltage increases by 2 times when dirty).
