Products
Switch-(H)GW1-15
Isolation switch GW1 is a switching device mainly used for 15kV transmission lines, designed for “power supply isolation, switching, connection and disconnection of small current circuits”, without arc suppression function.
Description
marker
Product Details
GW1Isolation Switch 15kV Isolation Switch (also known as Disconnector)
Isolation switch GW1 is a switching device mainly used for 15kV transmission lines, designed for "power supply isolation, switching, connection and disconnection of small current circuits", without arc suppression function. When the isolation switch is in the split position, there must be an insulation distance between the contacts and obvious signs of disconnection that meet the specified requirements; a switching device that can conduct current under normal circuit conditions and current under abnormal conditions (such as a short circuit) for a specified time when in the closed position.
Typically used as a high voltage isolation switch, that is, an isolation switch with a rated voltage above 1kV. Its operating principle and structure are relatively simple, but due to its wide application and high reliability requirements, it has a significant impact on the design, construction and safe operation of substations and power plants.
The main feature of an isolation switch is that it has no arcing capacity and can only open and close circuits without load current.
contact us
Related Popular Products
Composite silicone rubber terminal
High safety (explosion protection): this is their main advantage. Silicone rubber is an elastic material; if an internal malfunction occurs, the shell only cracks, preventing an explosion.
Lightning rod 66 kV
Zinc Oxide Composite Type: Highly resistant to contamination, suitable for substations and power lines Performance Standard: Meets GB/T 18802.1 and IEC 60099-4 specifications
disconnector-HJDW6-0.5630~2000
HJDW6 series is a low voltage fused isolation switch designed specifically for 50Hz AC distribution lines with rated voltages of 500V and below. Mainly used for short circuit, overload, open circuit and short circuit protection under no-load conditions on the low voltage side of transformers
Plug-in switch-GW13
GW13 series is an outdoor high voltage AC isolation switch designed specifically for 50Hz AC power systems. Mainly used to open and close circuits under no-load conditions to achieve electrical isolation or connect the neutral point of a transformer
Suspended insulator 10 kV
10kV suspension insulator is a key component used to support wires and provide insulation in power systems, mainly applied in key assemblies such as tension rods and corner rods of overhead power lines.
Suspended insulator 220 kV
220 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. The core is made of epoxy fiberglass and the protective shell is made of high temperature vulcanized silicone rubber, reducing weight by 45-50% compared to porcelain.
Plug-in switch-GN30-12D
GN30-12D is a special model of GN30-12: built-in grounding blade, increasing the safety of the grounding system. Supports manual control, control the movement of the blade by turning the handle.
Lightning rod 33 kV
33kV lightning rod mainly made of zinc oxide, including power plant type, distribution type and combination type (such as integrated design of 33kV combined lightning rod and fuse), suitable for lightning surge and continuous current power frequency protection in transmission and distribution systems.
Suspended insulator 110 kV
110 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. In typical applications, the rod core is made of glass fiber reinforced resin and the protective skirt is made of vulcanized high temperature silicone rubber, reducing weight by 50% compared to traditional porcelain. The technology of crimping the ends and double sealing eliminates the risk of breakdown of the connection between the core and the shell.
Insulator with 1/2 eye 24 kV
Connection Design: Single Eye/Double Eye Configuration: Suitable for hanging or tension insulators, double eye design is mainly used for hanging wires, and one eye for fixed ends.
Cold-shrinkable end coupling 10 kV
Made of silicone rubber or EPDM elastomer material through injection vulcanization molding and diameter expansion process, it has high elasticity and hydrophobicity. Once installed, it fits tightly to the cable interface, forming a sealed structure.
Disconnector-(H)GW4-24kV
GW4 Isolation Switch 24kV Isolation Switch (also known as a disconnector) The GW4 series breakers include 24kV voltage level models suitable for the electrical insulation requirements of medium voltage distribution systems
Disconnectors 24 kV Russia
Components: Consists of base, rotating shaft, frame, insulated contact blade, contacts and connecting structure, and other components using three-phase parallel.
Insulator with 1/2 eye 33 kV
33 kV, suitable for three-phase power lines and 50 Hz AC distribution systems, ensures long-term outdoor operation.
Switch-GN19-12C
GN19-12C type disconnect switch is an indoor wall-mounted high-voltage distribution device widely used in 50Hz AC power systems, rated voltage 12kV. It is mainly used for switching circuits under no-load conditions to achieve reliable isolation between electrical equipment and power supply. It supports three-phase parallel installation or wall installation in special scenarios
GIS terminal
The gas insulated switchgear terminal (GIDU), also known as the GIRU cable terminal, is a critical element for connecting high voltage cables to GIRU equipment. Sulfur hexafluoride (SF6) is used as external insulation and the device is enclosed in a metal housing.
