Products
Fuse-(H)RW11-15kV
Specially designed for short circuit and overload protection in power distribution systems, with load current switching function, suitable for protecting power equipment in complex electrical networks and harsh environments
Description
marker
Product Details
HRW11 12kV outdoor switch-fuse
Specially designed for short circuit and overload protection in power distribution systems, with load current switching function, suitable for protecting power equipment in complex electrical networks and harsh environments
Basic functions
Short Circuit Protection: The fuse melts quickly, cutting off fault current, protecting transformers and transmission lines.
Overload protection: achieving delayed melting due to the thermal accumulation effect of fuses, which meets the requirements of equipment overload.
Load current switching: Supports manual switching of rated load current (≤ 200A), easy to operate.
Operational Benefits
High Stability: The contact connecting part is specially treated to reduce the risk of poor contact and adapt to high temperature, humidity and sandstorms.
High Durability: Ceramic insulators are UV and salt spray resistant, and the melting tube is easy to replace, reducing operating and maintenance costs.
Typical Application Scenarios
Urban power grid: protection of distribution lines with large load fluctuations and high reliability requirements.
Industrial: Overcurrent protection for the high voltage side of transformers and small substations.
Harsh Environment: Protecting long distance power lines in coastal, plateau and windy areas.
HRW11 fuse, with its optimized arcing performance, high environmental adaptability and long service life, has become a key protective device in 12 kV distribution systems, meeting the high stability and safety requirements of modern power grids.
contact us
Related Popular Products
Plug-in assembly
The European connector head (a combination of front and rear plugs) is a cable splitter, which is a type of cable accessory.
Middle cold-shrinkable coupling 33 kV
Suitable for 33kV AC three-phase systems, designed using double-layer cold-shrink silicone tube with built-in stress cone to distribute the electric field evenly, local discharge capacity ≤ 10 pC; The connection of conductors is carried out by crimping, and the copper tube is suitable for cable cross-sections from 50 to 1000 mm².
Fuse-(H)RW7-15kV
Main Functions Short Circuit Protection: The fuse melts quickly, cutting off short circuit current, protecting transformers and transmission lines. Overload protection: achieving delayed melting due to the thermal accumulation effect of fuses, which meets the requirements of equipment overload. Load current switching: Supports manual switching of rated load current (≤100A), easy to operate.
“T” type connector
The T-plug connector is a fully insulated and sealed cable connector widely used in medium and high voltage power supply systems. Thanks to its T-shaped design, it allows for quick connection and disconnection of cables to equipment. Its main features include electrical stability and environmental adaptability. It is widely used in ring network distribution cabinets, branch cables and other systems.
Cold-shrinkable end coupling 24 kV
The main function of 24kV cold shrink cable terminal is to ensure safe and reliable cable operation, prevent damage caused by thermal expansion and contraction, and ensure good sealing and insulation protection. The cold shrink cable terminal uses cold shrink voltage control tube, suitable for voltage levels from 10kV to 35kV.
Composite silicone rubber terminal
High safety (explosion protection): this is their main advantage. Silicone rubber is an elastic material; if an internal malfunction occurs, the shell only cracks, preventing an explosion.
Traverse insulator 35 kV
Featuring a conical or cylindrical design, it serves as crossmember support and insulation, replacing traditional metal/wood crossmembers, reducing support height and simplifying design. Main materials include electrical porcelain and silicone rubber composite, and the grooved surface increases creepage distance and prevents fouling.
“H” type connector
An H-shaped cable connector is a cable accessory used to connect cables to ensure continuity of cable lines. It provides protection and support for electrical connections as well as mechanical support for cables.
Plug-in switch-GN30-12D
GN30-12D is a special model of GN30-12: built-in grounding blade, increasing the safety of the grounding system. Supports manual control, control the movement of the blade by turning the handle.
Suspended insulator 220 kV
220 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. The core is made of epoxy fiberglass and the protective shell is made of high temperature vulcanized silicone rubber, reducing weight by 45-50% compared to porcelain.
disconnector-HRWK-0.5400~800
HRWK series is a low voltage fused isolation switch designed for 50Hz AC distribution systems with rated voltage of 0.5kV and below, with circuit isolation and short circuit protection functions.
Plug-in switch-GW13
GW13 series is an outdoor high voltage AC isolation switch designed specifically for 50Hz AC power systems. Mainly used to open and close circuits under no-load conditions to achieve electrical isolation or connect the neutral point of a transformer
Heat-shrinkable middle coupling 20 kV
Heat-shrinkable cable connection is used for intermediate connection of cross-linked or oil-immersed cables with voltage levels of 35 kV and below. It is sealed and heat-shrink insulated to ensure stable electrical performance at the connection point.
Cold-shrinkable end coupling 110 kV
Formed by injection vulcanization of silicone rubber or ethylene propylene rubber, pre-expanded and lined with a spiral support structure, tightly adheres to the cable interface by elastic retracting force after installation, forming a strong seal. Adapt to high voltage level, suitable for 110kV – 220kV XLPE cables, with temperature resistance range from -50℃ to +90℃
Heat-shrinkable end coupling 1 kV
1kV heat shrink cable terminal is the main component for connecting low voltage cables, suitable for insulation processing and protection of 0.6-1kV cross-linked cables. It achieves sealing and strengthening the insulation between the cable and the terminal by heating heat shrink, and has the characteristics of small size, easy installation and wide environmental adaptability
Lightning rod 10 kV
Type classification: 10kV lightning rods mainly include power plant type, distribution type, and removable type, among which zinc oxide lightning rods have become the main ones due to their non-linear current-voltage characteristics.
