Products
Pin insulator 10 kV
The product includes a fiberglass and epoxy resin rod, a silicone rubber protective skirt, and metal connectors (such as fittings). Process Features: The silicone rubber protective skirt is made by injection molding to improve the electrical insulation of the interface; the metal reinforcement is connected to the core by crimping to provide flexural strength.
Description
marker
Product Details
The product includes a fiberglass and epoxy resin rod, a silicone rubber protective skirt, and metal connectors (such as fittings). Process Features: The silicone rubber protective skirt is made by injection molding to improve the electrical insulation of the interface; the metal reinforcement is connected to the core by crimping to provide flexural strength.
10 kV pin insulators are devices installed between conductors of different potentials or between conductors and grounding components, capable of withstanding voltage and mechanical loads. There are different types of insulators with different shapes. Although there are significant differences in the design and appearance of different types of insulators, they all consist of two main parts: insulating components and connecting fittings.
Insulators are a special type of insulation that can play an important role in overhead power lines. In the beginning, insulators were mainly used for power line towers, but gradually numerous disc insulators were used, suspended at one end of high-voltage power line towers to increase the creepage distance. They are usually made of glass or ceramic and are called insulators.
Insulators must not fail due to various mechanical and electrical stresses caused by changes in environmental conditions and electrical load. Otherwise, the insulators will not have a significant effect and may negatively affect the operation and service life of the entire line.
contact us
Related Popular Products
Heat-shrinkable end coupling 10 kV
Heat shrink terminals, commonly known as heat shrink cable heads, are widely used in the terminals of crosslinked cables or oil immersed cables, with a voltage level of 10KV. It can be divided into "indoor style" and "outdoor style".
Composite silicone rubber terminal
High safety (explosion protection): this is their main advantage. Silicone rubber is an elastic material; if an internal malfunction occurs, the shell only cracks, preventing an explosion.
Support insulator 66 kV
66 kV, suitable for three-phase high voltage AC transmission systems with a frequency of 50 Hz. The design consists of a fiberglass rod and a silicone rubber protective umbrella, which is 50% lighter than porcelain and resistant to UV radiation and salt spray.
Disconnector-(H)GW4-40.5kV
Ratings Voltage level: 40.5KV, suitable for three-phase AC 50Hz 24 Current specifications: Cover configurations such as 630A, 1250A, 2000A, etc., to meet different load requirements. Insulation characteristics: Frequency withstand voltage 95 kV (to ground), lightning impulse withstand voltage 185 kV (to ground), in accordance with IEC standards.
Heat shrink cable connector 230 kV
The 230 kV cable intermediate connector, whose voltage typically corresponds to the 127/220 kV rated voltage, is a critical component in high-voltage power transmission lines. It is mainly divided into two functional types and widely used in prefabricated structure.
Support insulator 35 kV
35 kV, suitable for high-voltage overhead lines of three-phase alternating current with a frequency of 50 Hz. Composite crossbar: fiberglass rod and protective skirt made of silicone rubber, weight reduced by 60%, high impact resistance, hydrophobicity: the surface energy of silicone rubber is low, which allows maintaining high insulation in dirty conditions (the flashover voltage increases by 2 times when dirty).
Plug-in switch-GW13
GW13 series is an outdoor high voltage AC isolation switch designed specifically for 50Hz AC power systems. Mainly used to open and close circuits under no-load conditions to achieve electrical isolation or connect the neutral point of a transformer
Cold-shrinkable end coupling 66 kV
66KV Cold Shrink Cable Terminal (Terminal) is an insulation, sealing and mechanical protection device for 66KV power cable termination, which is the main component of the outdoor connection of high voltage cables. It adopts elastomer material pre-expansion technology and achieves high reliability of cable insulation layer sealing and termination through elastic retraction force, which has the characteristics of protection, electric field control and long-term stability.
Support insulator 20 kV
20 kV. Made of composite material – silicone rubber. The surface of the column body has a corrugated structure to increase the leakage distance and prevent wastewater leakage. Some models use solid ceramic parts combined with a metal flange. Suitable for 50Hz three-phase AC distribution systems, substations, industrial distribution networks and other applications.
Lightning rod 330 kV
Zinc oxide lightning conductor: equipped with voltage equalization ring, excellent pollution resistance, creepage distance ≥ 25mm/kV, suitable for coastal salt fog or industrial pollution areas;
Middle cold-shrinkable coupling 33 kV
Suitable for 33kV AC three-phase systems, designed using double-layer cold-shrink silicone tube with built-in stress cone to distribute the electric field evenly, local discharge capacity ≤ 10 pC; The connection of conductors is carried out by crimping, and the copper tube is suitable for cable cross-sections from 50 to 1000 mm².
Plug-in assembly
The European connector head (a combination of front and rear plugs) is a cable splitter, which is a type of cable accessory.
Terminal made of ceramic-silicon-rubber composite material
The composite termination (terminal) is usually installed outdoors and serves as a termination device for high-voltage cables. Its main function is to connect underground or ducted high-voltage power cables to overhead power lines or key substation equipment such as transformers and switching devices.
Lightning rod 10 kV
Type classification: 10kV lightning rods mainly include power plant type, distribution type, and removable type, among which zinc oxide lightning rods have become the main ones due to their non-linear current-voltage characteristics.
Fuse-HPRWG2-15 kV
Specially designed for 35kV power systems, it has short circuit, overload and load current switching protection functions, suitable for harsh environments such as wind farms and power lines
Cold-shrinkable end coupling 110 kV
Formed by injection vulcanization of silicone rubber or ethylene propylene rubber, pre-expanded and lined with a spiral support structure, tightly adheres to the cable interface by elastic retracting force after installation, forming a strong seal. Adapt to high voltage level, suitable for 110kV – 220kV XLPE cables, with temperature resistance range from -50℃ to +90℃
