Products
Insulator with 1/2 eye 24 kV
Connection Design: Single Eye/Double Eye Configuration: Suitable for hanging or tension insulators, double eye design is mainly used for hanging wires, and one eye for fixed ends.
Description
marker
Product Details
Connection Design: Single Eye/Double Eye Configuration: Suitable for hanging or tension insulators, double eye design is mainly used for hanging wires, and one eye for fixed ends.
Installation method: allows vertical or horizontal installation with a deviation from the norm of less than 5 mm to ensure mechanical stability.
Material and technology:
Composite insulator: high temperature vulcanized silicone rubber (HTV) shell, epoxy glass fiber core, UV resistant and corrosion resistant.
Metal Accessories: The lug rod is made of stainless steel or hot-dip galvanized steel to prevent the reduction of mechanical strength caused by corrosion.
Typical Applications:
- Distribution lines: wire support and insulation for 20 kV insulated overhead lines.
- Substation equipment: insulation support for closed busbars, disconnectors and other equipment.
- Industrial environments: contamination-resistant distribution systems in harsh environments such as metallurgy and chemical engineering.
contact us
Related Popular Products
Disconnector-(H)GW4-72.5kV
GW4 Isolation Switch 72.5kV Isolation switch (also known as disconnector) 72.5kV, suitable for high voltage 50/60Hz three-phase AC transmission system. Insulation characteristics: lightning impulse withstand voltage 185 kV (to ground), power frequency withstand voltage 100 kV (to ground), higher value of failure withstand voltage, ensuring the reliability of electrical insulation after tripping.
Lightning rod 33 kV
33kV lightning rod mainly made of zinc oxide, including power plant type, distribution type and combination type (such as integrated design of 33kV combined lightning rod and fuse), suitable for lightning surge and continuous current power frequency protection in transmission and distribution systems.
Lightning rod 6 kV
Main components: Using zinc oxide valve plates, with non-linear current-voltage characteristics and response time ≤ 25ns. Shell material: silicone rubber or ceramic material, strong weather resistance (-40℃~85℃), suitable for outdoor environments with high humidity and salt fog.
Fuse-(H)RW9-15kV
Mainly used for short circuit and overload protection of power lines and transformers, it also has the function of opening and closing no-load lines and low load currents.
disconnector-HJDW6-0.5630~2000
HJDW6 series is a low voltage fused isolation switch designed specifically for 50Hz AC distribution lines with rated voltages of 500V and below. Mainly used for short circuit, overload, open circuit and short circuit protection under no-load conditions on the low voltage side of transformers
Middle cold-shrinkable coupling 66 kV
Rated voltage: 66 kV, lightning impulse withstand voltage ≥ 250 kV, power frequency withstand voltage ≥ 125 kV (continuously for 30 minutes); partial discharge capacity ≤ 5 pC (complies with IEC 60840 standard).
End coupling ready for installation 10 kV
Using rubber and polymer composite materials with elastic memory function, it can achieve 24 cold shrinkage installation process; The temperature resistance range covers 70℃ to 200℃, with good fire resistance and adapt to various working conditions
End coupling ready for installation 6 kV
Using rubber and polymer composite materials with elastic memory function, it can achieve cold shrinkage installation process of 24; Temperature resistance range covers 70℃ to 200℃, with good fire resistance and adapt to various working conditions
Switch-(H)GW4-15
GW4 series disconnect switches are outdoor high-voltage switchgears widely used in power systems, mainly for voltage isolation and safety protection in electrical equipment maintenance.
Switch-(H)GW1-15
Isolation switch GW1 is a switching device mainly used for 15kV transmission lines, designed for “power supply isolation, switching, connection and disconnection of small current circuits”, without arc suppression function.
Switch-GN19-12C
GN19-12C type disconnect switch is an indoor wall-mounted high-voltage distribution device widely used in 50Hz AC power systems, rated voltage 12kV. It is mainly used for switching circuits under no-load conditions to achieve reliable isolation between electrical equipment and power supply. It supports three-phase parallel installation or wall installation in special scenarios
Disconnector-(H)GW5-40.5kV
GW5 Isolation Switch 40.5 kV Isolation Switch (also known as disconnector) Double column horizontal rotating, consists of insulated posts, conductive blades, base and control mechanism. The blades move horizontally at a constant speed when opening and closing, with strong ice breaking ability. The insulation support is a rod structure that prevents contamination.
Suspended insulator 220 kV
220 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. The core is made of epoxy fiberglass and the protective shell is made of high temperature vulcanized silicone rubber, reducing weight by 45-50% compared to porcelain.
Disconnector-(H)GW4-24kV
GW4 Isolation Switch 24kV Isolation Switch (also known as a disconnector) The GW4 series breakers include 24kV voltage level models suitable for the electrical insulation requirements of medium voltage distribution systems
Disconnector-(H)GW4-40.5kV
Ratings Voltage level: 40.5KV, suitable for three-phase AC 50Hz 24 Current specifications: Cover configurations such as 630A, 1250A, 2000A, etc., to meet different load requirements. Insulation characteristics: Frequency withstand voltage 95 kV (to ground), lightning impulse withstand voltage 185 kV (to ground), in accordance with IEC standards.
Support insulator 110 kV
110 kV, suitable for high-voltage transmission and conversion systems of three-phase alternating current with a frequency of 50 Hz, ensuring long-term outdoor operation. The rod core is made of glass fiber reinforced resin, and the protective skirt is made of high temperature vulcanized silicone rubber, which is 50% lighter than porcelain and resistant to salt fog, ultraviolet radiation and chemical corrosion. Sealing the ends of the rod using the crimping method prevents moisture from entering the contact area of the rod core.
