Products
Cold-shrinkable end coupling 10 kV
Made of silicone rubber or EPDM elastomer material through injection vulcanization molding and diameter expansion process, it has high elasticity and hydrophobicity. Once installed, it fits tightly to the cable interface, forming a sealed structure.
Description
marker
Product Details
Made of silicone rubber or EPDM elastomer material through injection vulcanization molding and diameter expansion process, it has high elasticity and hydrophobicity. Once installed, it fits tightly to the cable interface, forming a sealed structure
Key Points of Quality Control
When wrapping with waterproof tape or self-adhesive tape, it should be continuous and smooth to prevent moisture from entering.
After the terminal shrinks, there should be no wrinkles on the surface, and the outline of the internal structure should be clear and visible
Scene adaptability
Suitable for indoor/outdoor scenarios such as distribution cabinets, ring main units and substations, compatible with XLPE cables, with a temperature resistance range of -50℃ to +90℃.
There is no need for heating installation, which avoids the risk of interlayer detachment of heat shrink terminals and has high technical versatility (covers several cable sections)
The main advantages of 10kV cold shrink cable terminals are elastic sealing and heat-free installation, while strictly adhering to the stripping and shrinking process specifications.
contact us
Related Popular Products
Cold-shrinkable end coupling 6 kV
6KV Cold Shrink Cable Terminal is a cable accessory that is made of elastic materials (such as silicone rubber or EPDM), sealed and insulated by elastic compression force. Its main components include cold shrink tension control tube, insulating tube, branch coupling, etc. Adaptive shrinkage is achieved by removing the inner support spiral tape to match the cable interface
Fuse (H)RW12-24kV
Specially designed for short circuit and overload protection of distribution lines and transformers, with the function of splitting and combining load currents, suitable for protecting power equipment on overhead lines and in harsh environments
Support insulator 10 kV
Post insulators are usually made of ceramic or epoxy composite materials, have a columnar structure as the main body and a corrugated surface to increase creepage distance and prevent waste water leakage and arcing.
Porcelain support insulator
Porcelain support insulators are made of porcelain and are a device installed between conductors of different potentials or between conductors and grounding elements, capable of withstanding voltage and mechanical load. There are different types of insulators with different shapes. Although there are significant differences in the design and appearance of different types of insulators, they all consist of two main parts: insulating components and connecting fittings.
Support insulator 20 kV
20 kV. Made of composite material – silicone rubber. The surface of the column body has a corrugated structure to increase the leakage distance and prevent wastewater leakage. Some models use solid ceramic parts combined with a metal flange. Suitable for 50Hz three-phase AC distribution systems, substations, industrial distribution networks and other applications.
Switch-(H)GW1-15
Isolation switch GW1 is a switching device mainly used for 15kV transmission lines, designed for “power supply isolation, switching, connection and disconnection of small current circuits”, without arc suppression function.
Fuse-(H)RW12-35kV
Specially designed for short circuit and overload protection of distribution lines and transformers, with the function of splitting and combining load currents, suitable for protecting power equipment on overhead lines and in harsh environments
Disconnectors 24 kV Russia
Components: Consists of base, rotating shaft, frame, insulated contact blade, contacts and connecting structure, and other components using three-phase parallel.
Fuse-(H)RW5-35 kV
HRW5 series is a 35kV open high voltage fuse specially designed for short circuit and overload protection of power lines and transformers, with open circuit and low load current line opening and closing functions.
Support insulator 66 kV
66 kV, suitable for three-phase high voltage AC transmission systems with a frequency of 50 Hz. The design consists of a fiberglass rod and a silicone rubber protective umbrella, which is 50% lighter than porcelain and resistant to UV radiation and salt spray.
Plug-in switch-GW13
GW13 series is an outdoor high voltage AC isolation switch designed specifically for 50Hz AC power systems. Mainly used to open and close circuits under no-load conditions to achieve electrical isolation or connect the neutral point of a transformer
Insulator with 1/2 eye 24 kV
Connection Design: Single Eye/Double Eye Configuration: Suitable for hanging or tension insulators, double eye design is mainly used for hanging wires, and one eye for fixed ends.
Heat-shrinkable end coupling 10 kV
Heat shrink terminals, commonly known as heat shrink cable heads, are widely used in the terminals of crosslinked cables or oil immersed cables, with a voltage level of 10KV. It can be divided into "indoor style" and "outdoor style".
Lightning rod 10 kV
Type classification: 10kV lightning rods mainly include power plant type, distribution type, and removable type, among which zinc oxide lightning rods have become the main ones due to their non-linear current-voltage characteristics.
disconnector-HRWK-0.5400~800
HRWK series is a low voltage fused isolation switch designed for 50Hz AC distribution systems with rated voltage of 0.5kV and below, with circuit isolation and short circuit protection functions.
End coupling ready for installation 6 kV
Using rubber and polymer composite materials with elastic memory function, it can achieve cold shrinkage installation process of 24; Temperature resistance range covers 70℃ to 200℃, with good fire resistance and adapt to various working conditions
