Products
Support insulator 10 kV
Post insulators are usually made of ceramic or epoxy composite materials, have a columnar structure as the main body and a corrugated surface to increase creepage distance and prevent waste water leakage and arcing.
Description
marker
Product Details
Post insulators are usually made of ceramic or epoxy composite materials, have a columnar structure as the main body and a corrugated surface to increase creepage distance and prevent waste water leakage and arcing.
Suitable for 50Hz three-phase AC distribution systems, mainly used for supporting wires, insulating live parts and grounding components, providing mechanical fixing and electrical insulation.
Typical applications: - Distribution line: 10 kV overhead line, conductor support, 15 tension section corner insulation.
- Installation of equipment: support for insulation of incoming and outgoing lines of distribution transformers, switches, disconnectors and other equipment.
- Special conditions: Chemical industrial parks and coastal areas prioritize the use of composite insulators to reduce the risk of flashover caused by pollution.
The selection of 10 kV post insulators, which are a major component of the distribution network, requires comprehensive consideration of environmental conditions, mechanical loads, and operation and maintenance costs. The additional use of porcelain and composite insulators can improve system reliability.
contact us
Related Popular Products
Lightning rod 24 kV
Type classification: 24kV lightning rod is mainly composed of zinc oxide composite external type, which is suitable for lightning surge protection of distribution systems and substation equipment. Performance standards: Must comply with GB/T 18802.1 national standard and IEC60099-4 standard, and some models are suitable for special environmental requirements such as high pollution and icing
Middle cold-shrinkable coupling 24 kV
Conductor Connection: Uses crimping or welding technology to securely connect two cable cores, which ensures good electrical conductivity between conductors, reduces contact resistance and minimizes energy loss. The insulating layer is made of silicone rubber, which has excellent insulating properties and corona resistance. It can withstand 24 kV voltage, preventing current leakage and short circuit.
Middle cold-shrinkable coupling 33 kV
Suitable for 33kV AC three-phase systems, designed using double-layer cold-shrink silicone tube with built-in stress cone to distribute the electric field evenly, local discharge capacity ≤ 10 pC; The connection of conductors is carried out by crimping, and the copper tube is suitable for cable cross-sections from 50 to 1000 mm².
Fuse-(H)RW11-15kV
Specially designed for short circuit and overload protection in power distribution systems, with load current switching function, suitable for protecting power equipment in complex electrical networks and harsh environments
Connecting coupling EPDM 20 kV
Definition: It is a device installed in the middle of a 20 kV power cable line and used to connect two cables to ensure continuous transmission of electricity. The base material, ethylene propylene rubber, performs functions such as insulation, sealing and mechanical protection.
Cold-shrinkable end coupling 110 kV
Formed by injection vulcanization of silicone rubber or ethylene propylene rubber, pre-expanded and lined with a spiral support structure, tightly adheres to the cable interface by elastic retracting force after installation, forming a strong seal. Adapt to high voltage level, suitable for 110kV – 220kV XLPE cables, with temperature resistance range from -50℃ to +90℃
Fuse (H)RW12-24kV
Specially designed for short circuit and overload protection of distribution lines and transformers, with the function of splitting and combining load currents, suitable for protecting power equipment on overhead lines and in harsh environments
Porcelain support insulator
Porcelain support insulators are made of porcelain and are a device installed between conductors of different potentials or between conductors and grounding elements, capable of withstanding voltage and mechanical load. There are different types of insulators with different shapes. Although there are significant differences in the design and appearance of different types of insulators, they all consist of two main parts: insulating components and connecting fittings.
End coupling ready for installation 10 kV
Using rubber and polymer composite materials with elastic memory function, it can achieve 24 cold shrinkage installation process; The temperature resistance range covers 70℃ to 200℃, with good fire resistance and adapt to various working conditions
Lightning rod 11 kV
Type classification: 11kV arresters are mainly distribution type and power plant type zinc oxide lightning arresters. Zinc oxide arresters have become mainstream due to their nonlinear current-voltage characteristics and high response speed.
Middle cold-shrinkable coupling 66 kV
Rated voltage: 66 kV, lightning impulse withstand voltage ≥ 250 kV, power frequency withstand voltage ≥ 125 kV (continuously for 30 minutes); partial discharge capacity ≤ 5 pC (complies with IEC 60840 standard).
Cold-shrinkable end coupling 10 kV
Made of silicone rubber or EPDM elastomer material through injection vulcanization molding and diameter expansion process, it has high elasticity and hydrophobicity. Once installed, it fits tightly to the cable interface, forming a sealed structure.
Support insulator 220 kV
220KV Composite Column Insulators are high voltage insulation equipment made of silicone rubber as the core combined with fiberglass rods and metal accessories, specially designed for power transmission lines and substations.
Fuse-(H)RW10-15kV
Mainly used for short circuit and overload protection in 10kV distribution systems, with rated load current switching function, suitable for protecting overhead lines and distribution transformers
Cold-shrinkable end coupling 33 kV
Insulation protection: Cold shrink cable terminal uses cold shrink voltage control tube, which can effectively insulate the cable from the external environment, prevent the cable from being damaged by external factors, and ensure good insulation protection
Heat-shrinkable middle coupling 20 kV
Heat-shrinkable cable connection is used for intermediate connection of cross-linked or oil-immersed cables with voltage levels of 35 kV and below. It is sealed and heat-shrink insulated to ensure stable electrical performance at the connection point.
