Products
Lightning rod 35 kV
Composite silicone rubber type (excellent dirt and explosion resistance);
The main models include power plant type, line suspension type and gapless zinc oxide lightning rod.
Performance standard: Meets the national standard GB/T 18802.1, and some models are suitable for special environmental requirements such as high altitude and salt fog
Description
marker
Product Details
Surge limiter 35 kV Surge limiter
Composite silicone rubber type (excellent dirt and explosion resistance);
The main models include power plant type, line suspension type and gapless zinc oxide lightning rod.
Execution standard:Meets the national standard GB/T 18802.1, and some models are suitable for special environmental requirements such as high altitude and salt fog
Main components:Mainly composed of zinc oxide valve plate, with excellent non-linear current-voltage characteristics, response time ≤ 25ns, and current power meet the short-circuit current requirements of 35kV systems;
Shell material:Composite silicone rubber type: lightweight, good weather resistance (-40℃~85℃)
Main functions:
Lightning protection for 35 kV power lines and substations to reduce the frequency of lightning triggers and the risk of breakdown of equipment insulation;
Suppression of power frequency overvoltage (for example, common overvoltage scenarios in wind farms and industrial plants).
Adaptation environment:
In high altitude areas, choose a composite type of canopy and add excess insulation;
Coastal areas of salt fog and chemical pollution must be cleaned with pressure equalization rings or anti-scale coatings at least twice a year.
contact us
Related Popular Products
Wind fuse-HRW12-35kV
A removable fuse is a specially designed fuse, the main feature of which is the ease of replacement and maintenance of the fuse (fuse element) without the need for a complete replacement of the equipment. Below is the basic information:
Fuse (H)RWX10-35kV
Mainly used for short circuit and overload protection of power systems 35 kV and below, with high current interruption capability, suitable for protecting equipment in power lines, substations and harsh environments
End coupling ready for installation 24 kV
Rated voltage: 12/24 kV, 18/24 kV two voltage levels, suitable for cross-linked polyethylene (XLPE) cable systems, local discharge capacity: ≤ 10pC
Middle cold-shrinkable coupling 66 kV
Rated voltage: 66 kV, lightning impulse withstand voltage ≥ 250 kV, power frequency withstand voltage ≥ 125 kV (continuously for 30 minutes); partial discharge capacity ≤ 5 pC (complies with IEC 60840 standard).
Support insulator 220 kV
220KV Composite Column Insulators are high voltage insulation equipment made of silicone rubber as the core combined with fiberglass rods and metal accessories, specially designed for power transmission lines and substations.
Switch-(H)GW1-15
Isolation switch GW1 is a switching device mainly used for 15kV transmission lines, designed for “power supply isolation, switching, connection and disconnection of small current circuits”, without arc suppression function.
Cold-shrinkable end coupling 24 kV
The main function of 24kV cold shrink cable terminal is to ensure safe and reliable cable operation, prevent damage caused by thermal expansion and contraction, and ensure good sealing and insulation protection. The cold shrink cable terminal uses cold shrink voltage control tube, suitable for voltage levels from 10kV to 35kV.
Pin insulator 10 kV
The product includes a fiberglass and epoxy resin rod, a silicone rubber protective skirt, and metal connectors (such as fittings). Process Features: The silicone rubber protective skirt is made by injection molding to improve the electrical insulation of the interface; the metal reinforcement is connected to the core by crimping to provide flexural strength.
Cold-shrinkable end coupling 6 kV
6KV Cold Shrink Cable Terminal is a cable accessory that is made of elastic materials (such as silicone rubber or EPDM), sealed and insulated by elastic compression force. Its main components include cold shrink tension control tube, insulating tube, branch coupling, etc. Adaptive shrinkage is achieved by removing the inner support spiral tape to match the cable interface
Fuse-(H)RW5-35 kV
HRW5 series is a 35kV open high voltage fuse specially designed for short circuit and overload protection of power lines and transformers, with open circuit and low load current line opening and closing functions.
Fuse-HPRWG2-15 kV
Specially designed for 35kV power systems, it has short circuit, overload and load current switching protection functions, suitable for harsh environments such as wind farms and power lines
Lightning rod 10 kV
Type classification: 10kV lightning rods mainly include power plant type, distribution type, and removable type, among which zinc oxide lightning rods have become the main ones due to their non-linear current-voltage characteristics.
Heat-shrinkable end coupling 24 kV
24kV heat shrink cable terminal is a key component used to connect the terminals of 24kV voltage level power cables, mainly to achieve cable terminal sealing, insulation protection and voltage control
Cold-shrinkable end coupling 110 kV
Formed by injection vulcanization of silicone rubber or ethylene propylene rubber, pre-expanded and lined with a spiral support structure, tightly adheres to the cable interface by elastic retracting force after installation, forming a strong seal. Adapt to high voltage level, suitable for 110kV – 220kV XLPE cables, with temperature resistance range from -50℃ to +90℃
Suspended insulator 220 kV
220 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. The core is made of epoxy fiberglass and the protective shell is made of high temperature vulcanized silicone rubber, reducing weight by 45-50% compared to porcelain.
Insulator with 1/2 eye 24 kV
Connection Design: Single Eye/Double Eye Configuration: Suitable for hanging or tension insulators, double eye design is mainly used for hanging wires, and one eye for fixed ends.
