Products
Cold-shrinkable end coupling 6 kV
6KV Cold Shrink Cable Terminal is a cable accessory that is made of elastic materials (such as silicone rubber or EPDM), sealed and insulated by elastic compression force. Its main components include cold shrink tension control tube, insulating tube, branch coupling, etc. Adaptive shrinkage is achieved by removing the inner support spiral tape to match the cable interface
Description
marker
Product Details
6KV Cold Shrink Cable Terminal is a cable accessory that is made of elastic materials (such as silicone rubber or EPDM), sealed and insulated by elastic compression force. Its main components include cold shrink tension control tube, insulating tube, branch coupling, etc. Adaptive shrinkage is achieved by removing the inner support spiral tape to match the cable interface
Specifically designed for 6kV medium voltage systems, balances insulation strength and electric field control, compatible with cross-linked polyethylene (XLPE) or oil-immersed paper insulated cables
Selection criteria
Cable parameters: compliance with voltage level 6 kV and cable cross-section (for example, 25 mm², 50 mm², etc.);
Environmental scenario: The waterproof structure should be strengthened for both indoor and outdoor terminals, and the level of protection can be simplified for indoor terminals
Maintenance Requirements
Regular inspection: Check the sealing and grounding condition every 1-2 years to avoid insulation aging or corrosion;
Environmental Monitoring: In areas with high humidity, additional protective measures must be taken.
contact us
Related Popular Products
Fuse-HPRWG2-15 kV
Specially designed for 35kV power systems, it has short circuit, overload and load current switching protection functions, suitable for harsh environments such as wind farms and power lines
Switch-(H)GW4-15
GW4 series disconnect switches are outdoor high-voltage switchgears widely used in power systems, mainly for voltage isolation and safety protection in electrical equipment maintenance.
Lightning rod 220 kV
Power plant type: suitable for protecting the incoming line of 220kV substation and the high voltage side of the transformer; Line Type: Suspended structure, built-in disconnector function, used to protect power lines from lightning surge, reducing lightning trigger speed
Suspended insulator 110 kV
110 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. In typical applications, the rod core is made of glass fiber reinforced resin and the protective skirt is made of vulcanized high temperature silicone rubber, reducing weight by 50% compared to traditional porcelain. The technology of crimping the ends and double sealing eliminates the risk of breakdown of the connection between the core and the shell.
Lightning rod 10 kV
Type classification: 10kV lightning rods mainly include power plant type, distribution type, and removable type, among which zinc oxide lightning rods have become the main ones due to their non-linear current-voltage characteristics.
Plug-in switch-GN30-12
The disconnector type GN30-12 is a rotating contact blade for indoor high-voltage switchgear, suitable for power systems with 50 Hz alternating current and 12 kV rated voltage. It is mainly used to open and close circuits under no-load conditions to achieve electrical isolation. Its compact design is suitable for installation in high-voltage switchgears, improving distribution system space utilization
Connecting coupling EPDM 20 kV
Definition: It is a device installed in the middle of a 20 kV power cable line and used to connect two cables to ensure continuous transmission of electricity. The base material, ethylene propylene rubber, performs functions such as insulation, sealing and mechanical protection.
Cold-shrinkable end coupling 10 kV
Made of silicone rubber or EPDM elastomer material through injection vulcanization molding and diameter expansion process, it has high elasticity and hydrophobicity. Once installed, it fits tightly to the cable interface, forming a sealed structure.
Support insulator 110 kV
110 kV, suitable for high-voltage transmission and conversion systems of three-phase alternating current with a frequency of 50 Hz, ensuring long-term outdoor operation. The rod core is made of glass fiber reinforced resin, and the protective skirt is made of high temperature vulcanized silicone rubber, which is 50% lighter than porcelain and resistant to salt fog, ultraviolet radiation and chemical corrosion. Sealing the ends of the rod using the crimping method prevents moisture from entering the contact area of the rod core.
Cold-shrinkable end coupling 33 kV
Insulation protection: Cold shrink cable terminal uses cold shrink voltage control tube, which can effectively insulate the cable from the external environment, prevent the cable from being damaged by external factors, and ensure good insulation protection
Insulator with 1/2 eye 24 kV
Connection Design: Single Eye/Double Eye Configuration: Suitable for hanging or tension insulators, double eye design is mainly used for hanging wires, and one eye for fixed ends.
Porcelain support insulator
Porcelain support insulators are made of porcelain and are a device installed between conductors of different potentials or between conductors and grounding elements, capable of withstanding voltage and mechanical load. There are different types of insulators with different shapes. Although there are significant differences in the design and appearance of different types of insulators, they all consist of two main parts: insulating components and connecting fittings.
Heat-shrinkable end coupling 33 kV
33KV heat shrink cable terminals are mainly used for terminal sealing, insulation protection and electric field control of XLPE or oil immersed cables in medium and high voltage power systems, suitable for indoor and outdoor power plants, substations, industrial equipment and other fields. Its main functions include sealing, moisture protection, insulation protection and voltage dissipation.
Lightning rod 35 kV
Composite silicone rubber type (excellent dirt and explosion resistance); The main models include power plant type, line suspension type and gapless zinc oxide lightning rod. Performance standard: Meets the national standard GB/T 18802.1, and some models are suitable for special environmental requirements such as high altitude and salt fog
Lightning rod 6 kV
Main components: Using zinc oxide valve plates, with non-linear current-voltage characteristics and response time ≤ 25ns. Shell material: silicone rubber or ceramic material, strong weather resistance (-40℃~85℃), suitable for outdoor environments with high humidity and salt fog.
Heat-shrinkable end coupling 1 kV
1kV heat shrink cable terminal is the main component for connecting low voltage cables, suitable for insulation processing and protection of 0.6-1kV cross-linked cables. It achieves sealing and strengthening the insulation between the cable and the terminal by heating heat shrink, and has the characteristics of small size, easy installation and wide environmental adaptability
