Products
Fuse-(H)RW7-15kV
Basic functions
Short Circuit Protection: The fuse melts quickly, cutting off short circuit current, protecting transformers and transmission lines.
Overload protection: achieving delayed melting due to the thermal accumulation effect of fuses, which meets the requirements of equipment overload.
Load current switching: Supports manual switching of rated load current (≤100A), easy to operate.
Description
marker
Product Details
Open high voltage fuse HRW7
Mainly used for short circuit and overload protection in 10 kV power systems, with load current switching function.
Basic functions
Short Circuit Protection: The fuse melts quickly, cutting off short circuit current, protecting transformers and transmission lines.
Overload protection: achieving delayed melting due to the thermal accumulation effect of fuses, which meets the requirements of equipment overload.
Load current switching: Supports manual switching of rated load current (≤100A), easy to operate.
Benefits
Environmental Adaptability: Withstands altitude ≤ 1000m, wind speed ≤ 35m/s and low temperatures down to -30℃.
Easy Maintenance: The fuse tube is designed to be replaceable, reducing operating and maintenance costs.
Typical Application Scenarios
Distribution Transformer Protection: Short circuit and overload protection on the high voltage side of a 10 kV distribution transformer.
Branch nodes of overhead power transmission lines: short circuit insulation and load switching on branches of distribution networks.
Industrial power systems: protection of high-voltage equipment in small substations, industrial and mining plants.
HRW7 fuse, with its high reliability, low maintenance cost and flexible performance, has become the main protection device in 10 kV distribution networks. When selecting, it is necessary to fully evaluate the load power, environmental conditions and switching requirements.
contact us
Related Popular Products
Switch-GN19-12C
GN19-12C type disconnect switch is an indoor wall-mounted high-voltage distribution device widely used in 50Hz AC power systems, rated voltage 12kV. It is mainly used for switching circuits under no-load conditions to achieve reliable isolation between electrical equipment and power supply. It supports three-phase parallel installation or wall installation in special scenarios
Support insulator 10 kV
Post insulators are usually made of ceramic or epoxy composite materials, have a columnar structure as the main body and a corrugated surface to increase creepage distance and prevent waste water leakage and arcing.
Disconnectors 24 kV Russia
Components: Consists of base, rotating shaft, frame, insulated contact blade, contacts and connecting structure, and other components using three-phase parallel.
Porcelain support insulator
Porcelain support insulators are made of porcelain and are a device installed between conductors of different potentials or between conductors and grounding elements, capable of withstanding voltage and mechanical load. There are different types of insulators with different shapes. Although there are significant differences in the design and appearance of different types of insulators, they all consist of two main parts: insulating components and connecting fittings.
Fuse-(H)RW10-15kV
Mainly used for short circuit and overload protection in 10kV distribution systems, with rated load current switching function, suitable for protecting overhead lines and distribution transformers
Disconnector-(H)GW4-24kV
GW4 Isolation Switch 24kV Isolation Switch (also known as a disconnector) The GW4 series breakers include 24kV voltage level models suitable for the electrical insulation requirements of medium voltage distribution systems
Traverse insulator 35 kV
Featuring a conical or cylindrical design, it serves as crossmember support and insulation, replacing traditional metal/wood crossmembers, reducing support height and simplifying design. Main materials include electrical porcelain and silicone rubber composite, and the grooved surface increases creepage distance and prevents fouling.
Plug-in switch-GN30-12
The disconnector type GN30-12 is a rotating contact blade for indoor high-voltage switchgear, suitable for power systems with 50 Hz alternating current and 12 kV rated voltage. It is mainly used to open and close circuits under no-load conditions to achieve electrical isolation. Its compact design is suitable for installation in high-voltage switchgears, improving distribution system space utilization
Terminal made of ceramic-silicon-rubber composite material
The composite termination (terminal) is usually installed outdoors and serves as a termination device for high-voltage cables. Its main function is to connect underground or ducted high-voltage power cables to overhead power lines or key substation equipment such as transformers and switching devices.
Suspended insulator 220 kV
220 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. The core is made of epoxy fiberglass and the protective shell is made of high temperature vulcanized silicone rubber, reducing weight by 45-50% compared to porcelain.
Lightning rod 330 kV
Zinc oxide lightning conductor: equipped with voltage equalization ring, excellent pollution resistance, creepage distance ≥ 25mm/kV, suitable for coastal salt fog or industrial pollution areas;
Cold-shrinkable end coupling 66 kV
66KV Cold Shrink Cable Terminal (Terminal) is an insulation, sealing and mechanical protection device for 66KV power cable termination, which is the main component of the outdoor connection of high voltage cables. It adopts elastomer material pre-expansion technology and achieves high reliability of cable insulation layer sealing and termination through elastic retraction force, which has the characteristics of protection, electric field control and long-term stability.
End coupling ready for installation 24 kV
Rated voltage: 12/24 kV, 18/24 kV two voltage levels, suitable for cross-linked polyethylene (XLPE) cable systems, local discharge capacity: ≤ 10pC
Plug-in connection at the front
The European plug connector (front) is a cable splitter, which is a type of cable accessory. It is a fully insulated, sealed cable connector suitable for medium and high voltage power supply systems, typically used in ring distribution cabinets, cable drop boxes and box type substations.
Cold-shrinkable end coupling 10 kV
Made of silicone rubber or EPDM elastomer material through injection vulcanization molding and diameter expansion process, it has high elasticity and hydrophobicity. Once installed, it fits tightly to the cable interface, forming a sealed structure.
Fuse-(H)RW11-15kV
Specially designed for short circuit and overload protection in power distribution systems, with load current switching function, suitable for protecting power equipment in complex electrical networks and harsh environments
