Products
End coupling ready for installation 24 kV
Rated voltage: 12/24 kV, 18/24 kV two voltage levels, suitable for cross-linked polyethylene (XLPE) cable systems, local discharge capacity: ≤ 10pC
Description
marker
Product Details
Rated voltage: 12/24 kV, 18/24 kV two voltage levels, suitable for cross-linked polyethylene (XLPE) cable systems, local discharge capacity: ≤ 10pC
Adopts a prefabricated silicone rubber voltage cone with an integrated semiconductor shielding layer to optimize electric field distribution
Typical Applications:
- Reconstruction of city electrical networks and connection points of industrial distribution systems;
- High humidity, coastal salt spray corrosion zones and high altitude conditions.
Complies with IEC 60502 and GB/T 11017 standards, actual selection should be verified based on cable parameters and environmental conditions
contact us
Related Popular Products
Middle cold-shrinkable coupling 110 kV
Intermediate cold shrink couplings for voltage 110 kV are ready-made insulating products designed for connecting cable lines with voltage 110 kV. They provide elastic shrinkage thanks to cold shrink technology, providing reliable insulation, sealing and mechanical protection. Their main characteristics include low maintenance, ease of installation and a high degree of adaptability, allowing them to be widely used in tunnels, substations and other places.
Fuse (H)RWX10-35kV
Mainly used for short circuit and overload protection of power systems 35 kV and below, with high current interruption capability, suitable for protecting equipment in power lines, substations and harsh environments
Heat-shrinkable end coupling 1 kV
1kV heat shrink cable terminal is the main component for connecting low voltage cables, suitable for insulation processing and protection of 0.6-1kV cross-linked cables. It achieves sealing and strengthening the insulation between the cable and the terminal by heating heat shrink, and has the characteristics of small size, easy installation and wide environmental adaptability
Lightning rod 35 kV
Composite silicone rubber type (excellent dirt and explosion resistance); The main models include power plant type, line suspension type and gapless zinc oxide lightning rod. Performance standard: Meets the national standard GB/T 18802.1, and some models are suitable for special environmental requirements such as high altitude and salt fog
Plug-in assembly
The European connector head (a combination of front and rear plugs) is a cable splitter, which is a type of cable accessory.
Middle cold-shrinkable coupling 33 kV
Suitable for 33kV AC three-phase systems, designed using double-layer cold-shrink silicone tube with built-in stress cone to distribute the electric field evenly, local discharge capacity ≤ 10 pC; The connection of conductors is carried out by crimping, and the copper tube is suitable for cable cross-sections from 50 to 1000 mm².
Fuse (H)RW12-24kV
Specially designed for short circuit and overload protection of distribution lines and transformers, with the function of splitting and combining load currents, suitable for protecting power equipment on overhead lines and in harsh environments
Lightning rod 220 kV
Power plant type: suitable for protecting the incoming line of 220kV substation and the high voltage side of the transformer; Line Type: Suspended structure, built-in disconnector function, used to protect power lines from lightning surge, reducing lightning trigger speed
Disconnector-(H)GW4-220kV
GW4-220 isolation switch is an open AC isolation switch designed specifically for 220kV high voltage power systems, mainly used for circuit switching and electrical isolation of equipment under no-load conditions.
disconnector-HRWK-0.5400~800
HRWK series is a low voltage fused isolation switch designed for 50Hz AC distribution systems with rated voltage of 0.5kV and below, with circuit isolation and short circuit protection functions.
Disconnector-(H)GW5-126kV(138kV)
GW5 Isolation Switch 126-138KV Isolation Switch (also known as Disconnector) Rated Voltage: 126KV, Suitable for Three-Phase AC 50Hz High Voltage Transmission System, Support Outdoor Operation in Difficult Environment
Middle cold-shrinkable coupling 24 kV
Conductor Connection: Uses crimping or welding technology to securely connect two cable cores, which ensures good electrical conductivity between conductors, reduces contact resistance and minimizes energy loss. The insulating layer is made of silicone rubber, which has excellent insulating properties and corona resistance. It can withstand 24 kV voltage, preventing current leakage and short circuit.
Composite silicone rubber terminal
High safety (explosion protection): this is their main advantage. Silicone rubber is an elastic material; if an internal malfunction occurs, the shell only cracks, preventing an explosion.
Lightning rod 66 kV
Zinc Oxide Composite Type: Highly resistant to contamination, suitable for substations and power lines Performance Standard: Meets GB/T 18802.1 and IEC 60099-4 specifications
Insulator with 1/2 eye 24 kV
Connection Design: Single Eye/Double Eye Configuration: Suitable for hanging or tension insulators, double eye design is mainly used for hanging wires, and one eye for fixed ends.
Pin insulator 10 kV
The product includes a fiberglass and epoxy resin rod, a silicone rubber protective skirt, and metal connectors (such as fittings). Process Features: The silicone rubber protective skirt is made by injection molding to improve the electrical insulation of the interface; the metal reinforcement is connected to the core by crimping to provide flexural strength.
