Products
Heat-shrinkable end coupling 1 kV
1kV heat shrink cable terminal is the main component for connecting low voltage cables, suitable for insulation processing and protection of 0.6-1kV cross-linked cables. It achieves sealing and strengthening the insulation between the cable and the terminal by heating heat shrink, and has the characteristics of small size, easy installation and wide environmental adaptability
Description
marker
Product Details
1kV heat shrink cable terminal is the main component for connecting low voltage cables, suitable for insulation processing and protection of 0.6-1kV cross-linked cables. It achieves sealing and strengthening the insulation between the cable and the terminal by heating heat shrink, and has the characteristics of small size, easy installation and wide environmental adaptability
Classification by number of cores: From one core to five cores: compatible with various types of cables.
Compliance with cross-sectional area: covers a range of conductors from 10 mm² to 400 mm²,
Application scenarios
- Low voltage distribution system: Insulation treatment of outgoing lines from the low voltage transformer side and cable terminals of distribution cabinets.
- Industrial Connection: Protection of cables for low voltage power equipment such as motors and pumping stations.
- New energy facilities: photovoltaic inverters, low-voltage connection of energy storage systems.
Key points during installation and maintenance
Heating Process: Use a special hot air gun to heat evenly, avoiding local overheating, which may cause cracking or uneven shrinkage.
Pre-treatment Requirements: Make sure the cable insulation layer is clean and undamaged and the connection area is polished flat.
1kV Heat Shrink Cable Terminals have become the primary solution for low voltage power systems due to their high compatibility, low operating costs and variety of model options. Selection should be based on cable parameters, environmental conditions and long-term operational reliability
contact us
Related Popular Products
Porcelain support insulator
Porcelain support insulators are made of porcelain and are a device installed between conductors of different potentials or between conductors and grounding elements, capable of withstanding voltage and mechanical load. There are different types of insulators with different shapes. Although there are significant differences in the design and appearance of different types of insulators, they all consist of two main parts: insulating components and connecting fittings.
Lightning rod 66 kV
Zinc Oxide Composite Type: Highly resistant to contamination, suitable for substations and power lines Performance Standard: Meets GB/T 18802.1 and IEC 60099-4 specifications
Middle cold-shrinkable coupling 24 kV
Conductor Connection: Uses crimping or welding technology to securely connect two cable cores, which ensures good electrical conductivity between conductors, reduces contact resistance and minimizes energy loss. The insulating layer is made of silicone rubber, which has excellent insulating properties and corona resistance. It can withstand 24 kV voltage, preventing current leakage and short circuit.
Suspended insulator 110 kV
110 kV, suitable for high-voltage 50 Hz three-phase AC transmission systems, ensuring long-term outdoor operation. In typical applications, the rod core is made of glass fiber reinforced resin and the protective skirt is made of vulcanized high temperature silicone rubber, reducing weight by 50% compared to traditional porcelain. The technology of crimping the ends and double sealing eliminates the risk of breakdown of the connection between the core and the shell.
Fuse-(H)RW11-15kV
Specially designed for short circuit and overload protection in power distribution systems, with load current switching function, suitable for protecting power equipment in complex electrical networks and harsh environments
Plug-in switch-GN19-12
The GN19-12 type disconnect switch is an indoor high-voltage switching device widely used in power systems with 50 Hz alternating current and 12 kV rated voltage. Mainly used to open and close circuits under no-load conditions to achieve reliable insulation between electrical equipment and power supply. It is divided into regular type (GN19-12) and wall type (GN19-12C), and supports three-phase parallel installation or wall installation in special scenarios.
Pin insulator 10 kV
The product includes a fiberglass and epoxy resin rod, a silicone rubber protective skirt, and metal connectors (such as fittings). Process Features: The silicone rubber protective skirt is made by injection molding to improve the electrical insulation of the interface; the metal reinforcement is connected to the core by crimping to provide flexural strength.
Cold-shrinkable end coupling 10 kV
Made of silicone rubber or EPDM elastomer material through injection vulcanization molding and diameter expansion process, it has high elasticity and hydrophobicity. Once installed, it fits tightly to the cable interface, forming a sealed structure.
Switch-(H)GW1-15
Isolation switch GW1 is a switching device mainly used for 15kV transmission lines, designed for “power supply isolation, switching, connection and disconnection of small current circuits”, without arc suppression function.
Cold-shrinkable end coupling 6 kV
6KV Cold Shrink Cable Terminal is a cable accessory that is made of elastic materials (such as silicone rubber or EPDM), sealed and insulated by elastic compression force. Its main components include cold shrink tension control tube, insulating tube, branch coupling, etc. Adaptive shrinkage is achieved by removing the inner support spiral tape to match the cable interface
Heat shrink cable connector 230 kV
The 230 kV cable intermediate connector, whose voltage typically corresponds to the 127/220 kV rated voltage, is a critical component in high-voltage power transmission lines. It is mainly divided into two functional types and widely used in prefabricated structure.
Heat-shrinkable end coupling 24 kV
24kV heat shrink cable terminal is a key component used to connect the terminals of 24kV voltage level power cables, mainly to achieve cable terminal sealing, insulation protection and voltage control
Fuse-(H)RW9-15kV
Mainly used for short circuit and overload protection of power lines and transformers, it also has the function of opening and closing no-load lines and low load currents.
Disconnector-(H)GW4-72.5kV
GW4 Isolation Switch 72.5kV Isolation switch (also known as disconnector) 72.5kV, suitable for high voltage 50/60Hz three-phase AC transmission system. Insulation characteristics: lightning impulse withstand voltage 185 kV (to ground), power frequency withstand voltage 100 kV (to ground), higher value of failure withstand voltage, ensuring the reliability of electrical insulation after tripping.
Disconnector-(H)GW5-40.5kV
GW5 Isolation Switch 40.5 kV Isolation Switch (also known as disconnector) Double column horizontal rotating, consists of insulated posts, conductive blades, base and control mechanism. The blades move horizontally at a constant speed when opening and closing, with strong ice breaking ability. The insulation support is a rod structure that prevents contamination.
Disconnector-(H)GW5-126kV(138kV)
GW5 Isolation Switch 126-138KV Isolation Switch (also known as Disconnector) Rated Voltage: 126KV, Suitable for Three-Phase AC 50Hz High Voltage Transmission System, Support Outdoor Operation in Difficult Environment
