Products
Heat-shrinkable end coupling 10 kV
Heat shrink terminals, commonly known as heat shrink cable heads, are widely used in terminals of crosslinked cables or oil immersed cables with voltage level of 10KV
It can be divided into "indoor style" and "outdoor style".
Description
marker
Product Details
Heat shrink terminals, commonly known as heat shrink cable heads, are widely used in terminals of crosslinked cables or oil immersed cables with voltage level of 10KV
It can be divided into "indoor style" and "outdoor style".
Heat shrink cable terminal is a device that uses heat shrink materials to achieve cable end sealing and insulation protection, widely used in connecting and protecting power cables, with voltage levels of 10KV. Below are its main characteristics and related information:
1.Application
Adaptation to the environment
Suitable for high altitude, cold, humid, salt fog and heavily polluted areas, with strong long-term stability.
UV resistant, anti-pollution, suitable for outdoor use.
Voltage level
Covers the range from low voltage (eg 1 kV) to medium high voltage (eg 35 kV).
2.Benefits and service
Benefits
Excellent sealing, waterproof and shockproof, reducing partial discharge by 35%.
Flexible design, customizable size and chemical composition to meet different requirements.
Service points
Check the seal regularly to prevent water vapor from entering; Key control of support mechanism stability is necessary in high temperature or vibration environments.
contact us
Related Popular Products
Disconnector-(H)GW5-40.5kV
GW5 Isolation Switch 40.5 kV Isolation Switch (also known as disconnector) Double column horizontal rotating, consists of insulated posts, conductive blades, base and control mechanism. The blades move horizontally at a constant speed when opening and closing, with strong ice breaking ability. The insulation support is a rod structure that prevents contamination.
Support insulator 220 kV
220KV Composite Column Insulators are high voltage insulation equipment made of silicone rubber as the core combined with fiberglass rods and metal accessories, specially designed for power transmission lines and substations.
Cold-shrinkable end coupling 6 kV
6KV Cold Shrink Cable Terminal is a cable accessory that is made of elastic materials (such as silicone rubber or EPDM), sealed and insulated by elastic compression force. Its main components include cold shrink tension control tube, insulating tube, branch coupling, etc. Adaptive shrinkage is achieved by removing the inner support spiral tape to match the cable interface
Fuse-(H)RW12-35kV
Specially designed for short circuit and overload protection of distribution lines and transformers, with the function of splitting and combining load currents, suitable for protecting power equipment on overhead lines and in harsh environments
Fuse-(H)RW3-15kV
Type HRW3-10 is an open high voltage 10kV fuse, specially designed for short circuit and overload protection of distribution lines and transformers, with circuit isolation function
disconnector-HJDW6-0.5630~2000
HJDW6 series is a low voltage fused isolation switch designed specifically for 50Hz AC distribution lines with rated voltages of 500V and below. Mainly used for short circuit, overload, open circuit and short circuit protection under no-load conditions on the low voltage side of transformers
Plug-in switch-GW13
GW13 series is an outdoor high voltage AC isolation switch designed specifically for 50Hz AC power systems. Mainly used to open and close circuits under no-load conditions to achieve electrical isolation or connect the neutral point of a transformer
Disconnector-(H)GW4-126kV(138kV)
GW4 Isolation Switch 126-138 kV Isolation Switch (also known as a disconnector) Used for line isolation, equipment maintenance, or power system switching during no-load conditions, cannot disconnect loads or fault currents and must be used in conjunction with circuit breakers.
disconnector-HRWK-0.5400~800
HRWK series is a low voltage fused isolation switch designed for 50Hz AC distribution systems with rated voltage of 0.5kV and below, with circuit isolation and short circuit protection functions.
Fuse-(H)RW11-15kV
Specially designed for short circuit and overload protection in power distribution systems, with load current switching function, suitable for protecting power equipment in complex electrical networks and harsh environments
Traverse insulator 35 kV
Featuring a conical or cylindrical design, it serves as crossmember support and insulation, replacing traditional metal/wood crossmembers, reducing support height and simplifying design. Main materials include electrical porcelain and silicone rubber composite, and the grooved surface increases creepage distance and prevents fouling.
Support insulator 66 kV
66 kV, suitable for three-phase high voltage AC transmission systems with a frequency of 50 Hz. The design consists of a fiberglass rod and a silicone rubber protective umbrella, which is 50% lighter than porcelain and resistant to UV radiation and salt spray.
Heat-shrinkable middle coupling 20 kV
Heat-shrinkable cable connection is used for intermediate connection of cross-linked or oil-immersed cables with voltage levels of 35 kV and below. It is sealed and heat-shrink insulated to ensure stable electrical performance at the connection point.
Lightning rod 33 kV
33kV lightning rod mainly made of zinc oxide, including power plant type, distribution type and combination type (such as integrated design of 33kV combined lightning rod and fuse), suitable for lightning surge and continuous current power frequency protection in transmission and distribution systems.
Terminal made of ceramic-silicon-rubber composite material
The composite termination (terminal) is usually installed outdoors and serves as a termination device for high-voltage cables. Its main function is to connect underground or ducted high-voltage power cables to overhead power lines or key substation equipment such as transformers and switching devices.
Disconnectors 24 kV Russia
Components: Consists of base, rotating shaft, frame, insulated contact blade, contacts and connecting structure, and other components using three-phase parallel.
