Products
Fuse (H)RWX10-35kV
Mainly used for short circuit and overload protection of power systems 35 kV and below, with high current interruption capability, suitable for protecting equipment in power lines, substations and harsh environments
Description
marker
Product Details
Open fuse HRWX10 with current limitation for HV
Mainly used for short circuit and overload protection of power systems 35 kV and below, with high current interruption capability, suitable for protecting equipment in power lines, substations and harsh environments
Basic functions
Short Circuit Protection: Quickly interrupt fault current with current limiting technology to protect transformers and power lines.
Overload protection: The melt thermal accumulation effect is used to achieve delayed melting to meet the equipment overload requirements.
Shared Load Current: Type RW10-10(F) is equipped with an arc chute and supports operation under load.
Operational Benefits
High Reliability: Vacuum arc quenching and sealed melting tube design, suitable for harsh operating conditions such as high altitude and frequent sandstorms.
Easy Maintenance: The melting tube can be quickly replaced, reducing operating and maintenance costs.
Typical Application Scenarios
35 kV power lines: Short circuit and overload protection for long distance power lines.
Substation equipment: overcurrent protection for power transformers, capacitor banks and transformers.
Industrial distribution system: load shedding and fault isolation of branches from distribution network 35 kV and below
The RWX10 series, with its high breaking capacity, vacuum arc extinguishing technology and environmental adaptability, has become a key protective device in high-voltage power systems, especially suitable for scenarios with stringent breaking capacity requirements.
contact us
Related Popular Products
Fuse-(H)RW9-15kV
Mainly used for short circuit and overload protection of power lines and transformers, it also has the function of opening and closing no-load lines and low load currents.
Pin insulator 10 kV
The product includes a fiberglass and epoxy resin rod, a silicone rubber protective skirt, and metal connectors (such as fittings). Process Features: The silicone rubber protective skirt is made by injection molding to improve the electrical insulation of the interface; the metal reinforcement is connected to the core by crimping to provide flexural strength.
Support insulator 66 kV
66 kV, suitable for three-phase high voltage AC transmission systems with a frequency of 50 Hz. The design consists of a fiberglass rod and a silicone rubber protective umbrella, which is 50% lighter than porcelain and resistant to UV radiation and salt spray.
Fuse-(H)RW12-35kV
Specially designed for short circuit and overload protection of distribution lines and transformers, with the function of splitting and combining load currents, suitable for protecting power equipment on overhead lines and in harsh environments
Lightning rod 66 kV
Zinc Oxide Composite Type: Highly resistant to contamination, suitable for substations and power lines Performance Standard: Meets GB/T 18802.1 and IEC 60099-4 specifications
Wind fuse-HRW12-35kV
A removable fuse is a specially designed fuse, the main feature of which is the ease of replacement and maintenance of the fuse (fuse element) without the need for a complete replacement of the equipment. Below is the basic information:
Support insulator 35 kV
35 kV, suitable for high-voltage overhead lines of three-phase alternating current with a frequency of 50 Hz. Composite crossbar: fiberglass rod and protective skirt made of silicone rubber, weight reduced by 60%, high impact resistance, hydrophobicity: the surface energy of silicone rubber is low, which allows maintaining high insulation in dirty conditions (the flashover voltage increases by 2 times when dirty).
Switch-GN19-12C
GN19-12C type disconnect switch is an indoor wall-mounted high-voltage distribution device widely used in 50Hz AC power systems, rated voltage 12kV. It is mainly used for switching circuits under no-load conditions to achieve reliable isolation between electrical equipment and power supply. It supports three-phase parallel installation or wall installation in special scenarios
End coupling ready for installation 6 kV
Using rubber and polymer composite materials with elastic memory function, it can achieve cold shrinkage installation process of 24; Temperature resistance range covers 70℃ to 200℃, with good fire resistance and adapt to various working conditions
Heat-shrinkable end coupling 10 kV
Heat shrink terminals, commonly known as heat shrink cable heads, are widely used in the terminals of crosslinked cables or oil immersed cables, with a voltage level of 10KV. It can be divided into "indoor style" and "outdoor style".
Traverse insulator 35 kV
Featuring a conical or cylindrical design, it serves as crossmember support and insulation, replacing traditional metal/wood crossmembers, reducing support height and simplifying design. Main materials include electrical porcelain and silicone rubber composite, and the grooved surface increases creepage distance and prevents fouling.
Disconnector-(H)GW4-27.5kV
GW4 Isolation Switch 27.5kV Isolation Switch (also known as Disconnector) The GW4 series 27.5kV Isolation Switch is designed specifically for railway catenary systems and specific high voltage scenarios
Plug-in connection at the front
The European plug connector (front) is a cable splitter, which is a type of cable accessory. It is a fully insulated, sealed cable connector suitable for medium and high voltage power supply systems, typically used in ring distribution cabinets, cable drop boxes and box type substations.
Fuse-(H)RW11-15kV
Specially designed for short circuit and overload protection in power distribution systems, with load current switching function, suitable for protecting power equipment in complex electrical networks and harsh environments
Porcelain support insulator
Porcelain support insulators are made of porcelain and are a device installed between conductors of different potentials or between conductors and grounding elements, capable of withstanding voltage and mechanical load. There are different types of insulators with different shapes. Although there are significant differences in the design and appearance of different types of insulators, they all consist of two main parts: insulating components and connecting fittings.
Support insulator 20 kV
20 kV. Made of composite material – silicone rubber. The surface of the column body has a corrugated structure to increase the leakage distance and prevent wastewater leakage. Some models use solid ceramic parts combined with a metal flange. Suitable for 50Hz three-phase AC distribution systems, substations, industrial distribution networks and other applications.
