Products
Disconnectors 24 kV Russia
Components: Consists of base, rotating shaft, frame, insulated contact blade, contacts and connecting structure, and other components using three-phase parallel.
Description
marker
Product Details
1.External dimensions
2.Components:Consists of base, rotating shaft, frame, insulated contact blade, contacts and connecting structure, and other components using three-phase parallel.
3.Main functions:
- Power supply for separate use of isolated superheaters
- Prevent voltage grounding
- Prevent connection of ground line
contact us
Related Popular Products
Insulator with 1/2 eye 24 kV
Connection Design: Single Eye/Double Eye Configuration: Suitable for hanging or tension insulators, double eye design is mainly used for hanging wires, and one eye for fixed ends.
End coupling ready for installation 6 kV
Using rubber and polymer composite materials with elastic memory function, it can achieve cold shrinkage installation process of 24; Temperature resistance range covers 70℃ to 200℃, with good fire resistance and adapt to various working conditions
Lightning rod 110 kV
Type classification: Power plant type: suitable for incoming line end substation and high voltage protection transformer side; Line type: hanging or pedestal design, partially integrated with the disconnector function, can quickly cut off the power frequency continuous current and reduce the lightning frequency.
Insulator with 1/2 eye 33 kV
33 kV, suitable for three-phase power lines and 50 Hz AC distribution systems, ensures long-term outdoor operation.
Cold-shrinkable end coupling 24 kV
The main function of 24kV cold shrink cable terminal is to ensure safe and reliable cable operation, prevent damage caused by thermal expansion and contraction, and ensure good sealing and insulation protection. The cold shrink cable terminal uses cold shrink voltage control tube, suitable for voltage levels from 10kV to 35kV.
Cold-shrinkable end coupling 33 kV
Insulation protection: Cold shrink cable terminal uses cold shrink voltage control tube, which can effectively insulate the cable from the external environment, prevent the cable from being damaged by external factors, and ensure good insulation protection
Lightning rod 35 kV
Composite silicone rubber type (excellent dirt and explosion resistance); The main models include power plant type, line suspension type and gapless zinc oxide lightning rod. Performance standard: Meets the national standard GB/T 18802.1, and some models are suitable for special environmental requirements such as high altitude and salt fog
Disconnector-(H)GW4-126kV(138kV)
GW4 Isolation Switch 126-138 kV Isolation Switch (also known as a disconnector) Used for line isolation, equipment maintenance, or power system switching during no-load conditions, cannot disconnect loads or fault currents and must be used in conjunction with circuit breakers.
Cold-shrinkable end coupling 10 kV
Made of silicone rubber or EPDM elastomer material through injection vulcanization molding and diameter expansion process, it has high elasticity and hydrophobicity. Once installed, it fits tightly to the cable interface, forming a sealed structure.
Fuse (H)RWX10-35kV
Mainly used for short circuit and overload protection of power systems 35 kV and below, with high current interruption capability, suitable for protecting equipment in power lines, substations and harsh environments
Middle cold-shrinkable coupling 33 kV
Suitable for 33kV AC three-phase systems, designed using double-layer cold-shrink silicone tube with built-in stress cone to distribute the electric field evenly, local discharge capacity ≤ 10 pC; The connection of conductors is carried out by crimping, and the copper tube is suitable for cable cross-sections from 50 to 1000 mm².
Fuse-(H)RW7-15kV
Main Functions Short Circuit Protection: The fuse melts quickly, cutting off short circuit current, protecting transformers and transmission lines. Overload protection: achieving delayed melting due to the thermal accumulation effect of fuses, which meets the requirements of equipment overload. Load current switching: Supports manual switching of rated load current (≤100A), easy to operate.
Heat-shrinkable middle coupling 20 kV
Heat-shrinkable cable connection is used for intermediate connection of cross-linked or oil-immersed cables with voltage levels of 35 kV and below. It is sealed and heat-shrink insulated to ensure stable electrical performance at the connection point.
“H” type connector
An H-shaped cable connector is a cable accessory used to connect cables to ensure continuity of cable lines. It provides protection and support for electrical connections as well as mechanical support for cables.
Lightning rod 33 kV
33kV lightning rod mainly made of zinc oxide, including power plant type, distribution type and combination type (such as integrated design of 33kV combined lightning rod and fuse), suitable for lightning surge and continuous current power frequency protection in transmission and distribution systems.
Cold-shrinkable end coupling 1 kV
Suitable for 0.6/1kV three-phase AC distribution systems, compatible with low voltage power cables (such as YJV and VV series), with a cross-sectional area of 1.5-630mm².
